Print Page - Safety Wire Drill Jig

Title: Safety Wire Drill Jig
Post by: Munch on September 16, 2008, 02:58:38 PM

I'm tired of losing key bolts, and am looking into a drill jig. Anyone have any firsthand experience, contemplating something like:

(http://www.pegasusautoracing.com/Images/M/3745.JPG)

Full detail:

http://www.pegasusautoracing.com/productdetails.asp?RecID=1192 (http://www.pegasusautoracing.com/productdetails.asp?RecID=1192)

Title: Re: Safety Wire Drill Jig
Post by: Speeddog on September 16, 2008, 05:43:32 PM

Never used one of those.

You need to turn a lot of rpm and feed real easy with the small drills, peck peck peck...
Plenty of cutting oil too.
I'd recommend getting about 10 of the drills.

Title: Re: Safety Wire Drill Jig
Post by: DucHead on September 16, 2008, 08:11:43 PM

I use the little pre-drilled star-shaped steel washers that go behind the bolt head to fasten safety wire.

Ducati Monster Forum

Moto Board => Accessories & Mods => Topic started by: Munch on September 16, 2008, 02:58:38 PM