Does anyone have a spare clutch lever that would fit my S2R1K? 14,000 miles of riding under my belt now and I go and pull a dumbsh!t move. I wheeled her out to warm up the engine before an evening ride and forgot to put the kickstand down when I stepped off. [bang] The end of the clutch lever sheared off so it's usable as a shorty right now, but it feels awkward. Luckily the only other damage was a slightly bent shift lever.
Any help would be appreciated. [thumbsup] [beer]
I have the stocker for the 695, but I'm not sure it will fit. If it's a go (speak up "O Knowledgeable Ones" [bow_down]) you're welcome to use it.
I don't think that will fit. The 695 has the coffin MC and the S2R1K has the pill bottles. The pin size is different.
Check w/ Chris Kelley from Ca-cycleworks.com and he can get you that part ASAP
I'll check when I get home, I know we pulled one off the s4
Quote from: caffeinejunkee on October 20, 2008, 02:18:02 PM
I have the stocker for the 695, but I'm not sure it will fit. If it's a go (speak up "O Knowledgeable Ones" [bow_down]) you're welcome to use it.
stocker? did you get pazzo?? ;D
WiWa I have a stock lever I'd gladly let you have but I doubt it will fit :P
Thanks y'all. Found this one and sent a pm to the seller but I doubt I'll get it before Thursday if it's still available.
http://ducatimonsterforum.org/index.php?topic=9543.0 (http://ducatimonsterforum.org/index.php?topic=9543.0)
JB weld
Quote from: ThelmaLou on October 20, 2008, 02:47:15 PM
stocker? did you get pazzo?? ;D
Close--got a set of CRG's ;D
I have a set of pazzo (black with red clickers) that I purchased and never put on the bike. Let me know if you are interested and I can take pics and send. Clutch looks perfect but end of brake lever has some very minor scratches (I bought them that way). Oh wait - they are for a 748...does that also work for your bike?
I've got a spare off the 1098...
That sux, I did the same thing to mine only the front tire slid on some sand when I was backing it into a parking spot and broke the tip of the brake lever off. It still works, so I will replace it with a set of Pazzos when the time comes [thumbsup]
Quote from: pipeliner1978 on October 20, 2008, 02:22:22 PM
I'll check when I get home, I know we pulled one off the s4
Any luck finding the S4's stock lever?
I've got a stock 12mm pivot hole lever for a Fiver!
Steve
I'm set thanks to Tommy. Now if I could only get word back from AMS on whether not they'll get it fixed in time.