After throwing a rod at 60mph on the Hwy 101 near Los Angeles, it looks like my 2000 M900ie motor is junk and I will be better off buying a replacement. [bang]
If anybody has one (or knows of one), please send me a PM. Keep it upright, and thanks!!
-NWM
I can't help you with a replacement, but if you want to sell the old one, I can always use the surviving parts here. Contact me direct if you're interested.
Might wanna post in the Parts Wanted section.
Oops, see that you have.
PM M9hundo, he should be able to hook you up.
what caused the rod to punch thru the engine? are you gonna do any engine mod (since the new engine is already out) like hi compression pistons, bored heads.....
I probably seized a rod bearing. The motor is not really worth rebuilding, so I am looking for a new one.
Thanks for the tip, Speeddog. I'll get in touch with M9hundo.
Norm, I'll send you a PM. The motor is at ProItalia in Glendale. Let's work something out and you can pick it up.
I (actually my brother in law) wrecked my '00 M900ie 8/13/08. Ins totaled the bike but the motor looked to be ok. It was at Copart in Reno, 775-322-4377, lot #15231778. Not sure what, if anything, happened to it, but might be worth chasing. Sure would be good to know some good came of it! Good luck - Tom