I have a stainless termi slip on and its damaged.Anybody got any idea how or if this pipes is fixable.
I will post the pic soon...pls help..thank you
Depends on what you mean by fixed. If its round and nominal metric ID you can probably disassemble the shell and replace it with a suitable aluminum shell. Its allot of work and the saving between a used one and repaired will not be much. If its odd shaped then used replacement is probably your only option. Check the posts here for sources for the shells. Also keep an eye out here an on eBay, people often put stock slip-ons up as they upgrade to TI or carbon. Knowing what you have is helpful too because people often have them sitting around in they're basement like me, for an 07' S4RS.
Quote from: Ducnial on January 25, 2009, 03:59:34 PM
Depends on what you mean by fixed. If its round and nominal metric ID you can probably disassemble the shell and replace it with a suitable aluminum shell. Its allot of work and the saving between a used one and repaired will not be much. If its odd shaped then used replacement is probably your only option. Check the posts here for sources for the shells. Also keep an eye out here an on eBay, people often put stock slip-ons up as they upgrade to TI or carbon. Knowing what you have is helpful too because people often have them sitting around in they're basement like me, for an 07' S4RS.
I have the 08 m696.Yes you are right.Probably my best option is to replace the shell since its odd shape not round.So any idea where i can get the shell???thanks for the idea.
try http://www.pjengineering.co.uk/index.asp
Quote from: w7ck7d on January 25, 2009, 08:31:27 PM
I have the 08 m696.Yes you are right.Probably my best option is to replace the shell since its odd shape not round.So any idea where i can get the shell???thanks for the idea.
Wow exactly what i was looking for..But i wish they have here in the US. :(
must be somewhere in the US that sells this stuff