Any idea if a centerstand off an 05 St3 will fit an 01 monster 900? thanks, Ben
Don't know bout the st one but i believe i still have the actual made for monsters one that was on my 99 900. if you want it (and i can find it) you can have it for the price of shipping
Thanks Grandpa Nate, thats a really generous offer. Let me know when and if you find it and I can paypal you the $ immediately. Thanks again, been looking for one for a while! -Ben
I will look tonight and let you know
Should swap straight across. AFAIK, there is only one Ducati center stand (Monster & ST fitment, others...maybe).
That's a GENEROUS offer Grampa Nate! [thumbsup]
Heck... I figure I don't use it.
Definitely, thanks again Grandpa Nate for looking, even of you dont still have it. Whats up Stu, its ben from Vegas. Thanks for making the monster smoother, faster, cooler last year for me. I ended up adding a power commander, triple tree, and several other things i cant think of right now. I now have more $ invested in mods and maintenance than i actually paid for the bike. Do you know anything about this phenomenon? haha -Ben
I am VERY sorry and beg forgiveness. [bow_down] Shit has been super busy around here and I forgot to look. I will look tonight.
Again I am sorry.
Sorry to resurrect an old thread but... I was looking on ebay for a center stand. Some have more pieces than others:http://www.ebay.com/itm/ducati-monster-center-stand-/231815388232?hash=item35f9461c48:g:MNwAAOSwqrtWmaaP&vxp=mtr (http://www.ebay.com/itm/ducati-monster-center-stand-/231815388232?hash=item35f9461c48:g:MNwAAOSwqrtWmaaP&vxp=mtr) vs. http://www.ebay.com/itm/2001-Ducati-ST4-Center-Stand-150022-/221996752619?hash=item33b0099eeb:g:kWsAAOSwL7VWmnNR&vxp=mtr (http://www.ebay.com/itm/2001-Ducati-ST4-Center-Stand-150022-/221996752619?hash=item33b0099eeb:g:kWsAAOSwL7VWmnNR&vxp=mtr)
My question is are those additional parts necessary for mounting on my 750?
The first one, #231815388232 is missing the left side bracket/pivot that bolts to the motor, and the long through-bolt.
The long through-bolt isn't such a big issue, I used a regular Ducati engine mount bolt on the last stand I fitted.
You'll have a hard time finding the bracket/pivot.
The seller may still have it kicking around, and not know what it is, so ask.
The second one, #221996752619, has all the parts.
Whilst the second one looks complete what appears to be missing is the required set of aluminium spacers - nothing major but I have this kit ready to go on my 900 and thought I'd add some info.
I have 1 kicking around off an ST w/all the ST specific parts should anyone be interested. I'm in a 'clean the garage out' kinda mood lately...
Thanks for the advice. I bought one w/o the spacers. I will try and fit it this weekend. Any suggestions for the spacers, like flat washers? It has been knocked over four times this year already.
They are just assorted ally spacers so I don't see why you can't replace them with the correct diameter washers.
I tried to install today and through bolt is blocked on right side. Correct me if wrong but stand is mounted using reamost rearset bolts and the through-bolt http://www.webbikeworld.com/ducati-motorcycles/gt-1000/center-stand/gt-1000-center-stand-mounting-hole.jpg (http://www.webbikeworld.com/ducati-motorcycles/gt-1000/center-stand/gt-1000-center-stand-mounting-hole.jpg) next. There is a threaded brass fitting installed on the right/opposite end blocking the through bolt. It mounts a holder for the gas tank vent hose. Do I just bang it out with drift?
No.
It's a tapered collet assembly, like a bar-end.
Loosen the bolt a turn or two, tap it lightly, and it should release the taper and you can wiggle it out.
Just a word of caution: my center strand sprung up while we were removing the front wheel once.
Also, it had to be modified to work around the Termi exhaust. Ducati's own aftermarket parts don't always work well with each other. [roll]