So when I did the first bracket it was ugly made of super thin material and kept hitting the rear wheel on large bumps. So came the time for a new one. I found some good sized gauge stainless material. Then came the measuring, planning and lots of inspiration. And presto the new mod. then sat back and had a [drink]
(http://i286.photobucket.com/albums/ll109/Latinbalar/Motorcycle%20Stuff/IMG_0786.jpg)
(http://i286.photobucket.com/albums/ll109/Latinbalar/Motorcycle%20Stuff/IMG_0788.jpg)
(http://i286.photobucket.com/albums/ll109/Latinbalar/Motorcycle%20Stuff/IMG_0793.jpg)
(http://i286.photobucket.com/albums/ll109/Latinbalar/Motorcycle%20Stuff/IMG_0791.jpg)
And since I know alot of people in the right places I can have these laser cut on a mass production scale and machine bent. So if there is enough instrest let me know.
Nice work [thumbsup] [thumbsup]
If you're not already on it, may I suggest these as combined plate lights and plate bolts?
http://www.customdynamics.com/illuminatorz_licence_plates.htm (http://www.customdynamics.com/illuminatorz_licence_plates.htm) (scroll down a bit)
If you go for these, remember to slide the washer and nut on to the wire before connecting ;)
(http://i329.photobucket.com/albums/l394/stopintime/black_tag_boltz_small.jpg)
QuoteNice work
If you're not already on it, may I suggest these as combined plate lights and plate bolts?
http://www.customdynamics.com/illuminatorz_licence_plates.htm (http://www.customdynamics.com/illuminatorz_licence_plates.htm) (scroll down a bit)
If you go for these, remember to slide the washer and nut on to the wire before connecting
those are cool, but i have the clear alternative light.
Quote from: Latinbalar on May 01, 2009, 11:36:12 AM
those are cool, but i have the clear alternative light.
:) Ok, to me it looked like the bracket blocks the integrated plate light. (Since this bracket seems to be a little longer than most others)