http://www.youtube.com/watch?v=gy5_Juboyd4
Nice work Bazz, where were you riding? [moto]
I don't like the way the Goose in the Magna was cutting the corners.
on the sunny east coast of tassie , yeh i dont think he likes bikes , the roads around here were made for bikes just got to ceep a look out for road kill and camper van that love cutting corners [thumbsup]
Kind of hard to tell what lane the car was actually in!
The mount seems to work nicely.
great road, good riding Bazz, I can't say something nice about the magna so Mum says I'm not allowed to say anything.
and you've mastered the youtube link as well.
yer thanks spider for all your help and every one else , there are miles upon miles of roads like that here [moto]
Bazz that's great really looking forward to getting something going on Dock's bike now.
Picked the camera this week, start work soon.
Matty...
matty what camera are you geting , im looking at go pro 3 its water proof to 30 meters so i can mount on the windsurfer as well , finerley finished tweaking the mounting bracket to day went for a spin to night got perfect footage no camera shake and it works better behind the tinted eagle screen will post some footage tomorrow bazz [thumbsup]
It looks like St Mary's pass Bazz. You can tell they had that big fire through there about 18 months ago 'cos all the trees have leaves growing up the trunk.
Passing on double whites I see? Its almost essential down here if you don't want to be stuck behind traffic all the way.
Thanks for putting it up!
sshhhss techno the next good day ill do another pass and see if you raconize that one [moto]
Bazz20,
Great video mate... enjoyed watching it. Very narrow road in parts.
Bret
finnaly happy with camera mount ,got good angles, camera protected behind tinted screen and got vibrations down to a minimum [moto]
http://www.youtube.com/watch?v=WXNoMQp4Di0
Heading south out of St Helens right? My grandparents used to live there. Too bad its a 60 zone.
Camera mounts seems to work really well. Mounting it behind the screen really reduces the wind noise and allows you to capture the brilliant noise of the bike. [thumbsup]
spot on techno , yep i agree without the sound you only getting half of the story on a normal telly its crystal clear so that will do me [thumbsup]
Looks like you hit the nail on the head Bazzo well done [thumbsup]
Now all you need is some open road so you can have some fun [moto]
thanks doc plenty of roads around here if your ever in tassie i guantee youll want a spell arfter an hour
doc hows your camera mount going , any avances yet [coffee]
Quote from: bazz20 on May 22, 2008, 12:02:25 AM
doc hows your camera mount going , any avances yet [coffee]
Sh#t house bazz havent even got time to buy the camera yet, been running around like a blue arse fly this week.
Hope to make a break for it tomorrow. brackets shouldnt take long il just make them my self and keep sh#ted out of it.
He gave me the sh#ts today so i got him to weed the median strip all day.
Quote from: Dockstrada on May 22, 2008, 12:08:40 AM
Sh#t house bazz havent even got time to buy the camera yet, been running around like a blue arse fly this week.
Hope to make a break for it tomorrow. brackets shouldnt take long il just make them my self and keep sh#ted out of it.
He gave me the sh#ts today so i got him to weed the median strip all day.
[laugh] [laugh] [laugh]
You're being too hard on him!
You need to guide him Grasshopper, wax the F250, wax the bike(s), wax on, wax off. [laugh]
Quote from: Super T.I.B on May 22, 2008, 12:12:14 AM
[laugh] [laugh] [laugh]
You're being too hard on him!
You need to guide him Grasshopper, wax the F250, wax the bike(s), wax on, wax off. [laugh]
He did the f250 last week once before the rain and once after wax on wax off.......... wax on wax off..........WAX ON WAX OFF............. SEE YA LATER SH#TED [laugh]
Who hired this loser anyway?
Gotta be something good going for him?
Can he sweep floors? Make coffee (instant)?
What sort of apprentice is he anyway? Does he turn up late? Does he turn up stoned?drunk? Can he pass the right tools to the tradesmen when they ask for it?
And the BIG question...He's not an EMO is he?
Quote from: Super T.I.B on May 22, 2008, 12:21:16 AM
Who hired this loser anyway?
Gotta be something good going for him?
Can he sweep floors? Make coffee (instant)?
What sort of apprentice is he anyway? Does he turn up late? Does he turn up stoned?drunk? Can he pass the right tools to the tradesmen when they ask for it?
And the BIG question...He's not an EMO is he?
I hired him, he's built like a brick sh#touse for a 17 year old so he's good for lifting sh#t he's a coconut , good kid But no drugs no drink never late.The only thing is he doesn’t listen. his brain is in there somewhere we can hear it knocking around when we try and strangle him .He's getting better so he’s got half a chance.
ill look foward to seeing photos tomorrow arvo and some vid by the end of the weekend , bazz [moto]
Quote from: Dockstrada on May 22, 2008, 12:30:52 AM
I hired him, he's built like a brick sh#touse for a 17 year old so he's good for lifting sh#t he's a coconut , good kid But no drugs no drink never late.The only thing is he doesn’t listen. his brain is in there somewhere we can hear it knocking around when we try and strangle him .He's getting better so he’s got half a chance.
Say no more, he'll get there.
Is he a rugby player? if he is a forward, yeah, not the sharpest tool in the shed. ;)
Quote from: bazz20 on May 22, 2008, 12:32:09 AM
ill look foward to seeing photos tomorrow arvo and some vid by the end of the weekend , bazz [moto]
Hay bazz you want a job ???
You know how to put the Pressure on maybe you can sort Sh#ted out [cheeky]
sorry doc but 31st not far away now [laugh] [wine] [moto] [moto] [moto] [moto] [moto]
If you need some help sorting the mount further next week, just give me a buzz.
You know I am always around to help, I might even be able use a tool or two.
I can swing a hammer and hit the nail on the head.....
Quote from: mattyvas on May 22, 2008, 04:12:35 AM
If you need some help sorting the mount further next week, just give me a buzz.
You know I am always around to help, I might even be able use a tool or two.
I can swing a hammer and hit the nail on the head.....
Thanks Matty [thumbsup]
Il try to spin you spacers up On Friday 8)
I'm always up for a foreigner, being a Fitter and all.
if you need a hand, let me know and I will only be too happy to help. [thumbsup]
I have my own tools too, 4 toolboxes worth. And 1 tool bag. ;)
Quote from: Super T.I.B on May 22, 2008, 04:26:57 AM
I'm always up for a foreigner, being a Fitter and all.
if you need a hand, let me know and I will only be too happy to help. [thumbsup]
I have my own tools too, 4 toolboxes worth. And 1 tool bag. ;)
I've been out done, I just have one little hammer......
Oh and a couple of screw drivers.
Cool to know, thanks Super.
Cheers for the spacers Dock, no real rush though.
Whenever you can get to it.
Thanks ya'll
Matty...
My pride and joy is the Sidchrome/Proto 1300 piece toolchest, not the best rep like they used to have but it is an awesome bit of kit. [thumbsup]
Anytime Matty, you have my number. And anyone else for that matter. ;)
super can you adjust my chain please , i like new buying tools as well [laugh] [cheeky]