Print Page - What do i put where my mirrors were???

Title: What do i put where my mirrors were???
Post by: Brandovibe on July 15, 2009, 07:00:11 AM

I took off my stock mirrors on my 2007 S4RS and went with the CRG bar end mirrors. The question is, what do i use to fill in the ugly holes where the stock mirrors were? One time i saw a nice decorative billet screw in plug made for that purpose, but i forget which site i saw them on and now i cant find them again!!! Anyone know of a place to get something to put there?

Thanks!

Title: Re: What do i put where my mirrors were???
Post by: Takster on July 15, 2009, 07:05:57 AM

I just flipped that side of the clamp so that the hole faces down. [thumbsup]

Title: Re: What do i put where my mirrors were???
Post by: NAKID on July 15, 2009, 07:57:49 AM

Quote from: Takster on July 15, 2009, 07:05:57 AM
I just flipped that side of the clamp so that the hole faces down. [thumbsup]

Title: Re: What do i put where my mirrors were???
Post by: teddy037.2 on July 15, 2009, 08:44:52 AM

flipping only works for the coffins... the goldlines clamp from the top.

you can look for the clampy bits from brembo to replace the ones that are threaded for mirror mount

Title: Re: What do i put where my mirrors were???
Post by: JEFF_H on July 15, 2009, 09:17:45 AM

5/16" plastic plug from Lowes

Title: Re: What do i put where my mirrors were???
Post by: unreale7ss on July 15, 2009, 10:29:19 AM

i say screw the holes and just ride it mirrorless. thats how i roll.

Title: Re: What do i put where my mirrors were???
Post by: corey on July 15, 2009, 10:48:52 AM

^^same here.

Title: Re: What do i put where my mirrors were???
Post by: Old_and_slow on July 15, 2009, 01:05:04 PM

Quote from: teddy037.2 on July 15, 2009, 08:44:52 AM

you can look for the clampy bits from brembo to replace the ones that are threaded for mirror mount

and if you look at yoyodyne, you'll find them...

Title: Re: What do i put where my mirrors were???
Post by: hihhs on July 15, 2009, 08:31:30 PM

Quote from: Takster on July 15, 2009, 07:05:57 AM
I just flipped that side of the clamp so that the hole faces down. [thumbsup]

Brilliant!!!
Just swapped stock for CRG, got the plastic thingy's from Lowe's and still didn't like the look. Saw your post and walked out to the garage and flipped 'em.

I can't believe I didn't think of that!!!

Thanks Takster!!! [beer]

Title: Re: What do i put where my mirrors were???
Post by: brimo on July 15, 2009, 08:52:03 PM

A couple of stainless or black allen head screws(6mm-1/4 inch diameter) with some plastic or rubber hose (6mm-1/4 inch internal diameter) over the thread to bring them up to the diameter of the holes, screw them in, away you go should cost you about $2-00

Title: Re: What do i put where my mirrors were???
Post by: ducaticop on July 16, 2009, 02:26:03 AM

(http://ecx.images-amazon.com/images/I/41CJTG0TG6L._SL500_AA280_.jpg)

Title: Re: What do i put where my mirrors were???
Post by: Dannog on July 16, 2009, 03:27:48 AM

great idea DC
(http://www.riverdolls.com.au/elvis21.gif)

Ducati Monster Forum

Moto Board => Accessories & Mods => Topic started by: Brandovibe on July 15, 2009, 07:00:11 AM