I'll be changing over to Tassie plates soon, so I need to get a roadworthy.
I was at the bike shop in Lonnie the other day to make some enquiries. It seems the only issues I have, are a blown tail light, and the side stand switch.
At the moment my cut off switch is disabled (it was like that when I got it from the dealer ???)
I was reading in the general tech section about a mod for this. You can wire in a diode so the bike will run with the stand down, but the moment it is put in gear, then engine will die. http://ducatimonsterforum.org/index.php?topic=280.0 (http://ducatimonsterforum.org/index.php?topic=280.0)
Will this satisfy Australian road rules? Or more specifically Tassie rules?
If it's easier I'll just wire it up how it should be...
thats a new one i never heard that and ive had afew bikes put over the pitts and they never checked my side stand but i ve got the diodes if you want to do that mod the main thing will be your tail chop, exhaust ,lights and make sure theres no fluid leaks and your vin code is easy to read on the engine and frame [thumbsup] , theres a bloke out at perth thats easy going ;)
I asked about the chop, they said it was fine. The bloke even had a look and said "yeah, no worries" ;D
He heard how loud the pipes are, that didn't seem to worry him either.
Maybe he was expecting me to book it in to have the switch fixed there. [laugh]
Here is the wire from the side stand:
(http://i319.photobucket.com/albums/mm441/Zook_2008/The%20Monster/28082009165.jpg)
It looks like the white and green wires have been "spliced" together. If I separate these two, will the switch then work as it should?
yes more than likely, try it, you won't break anything.
Quote from: Yellow Meanie on August 22, 2009, 11:33:41 PM
I asked about the chop, they said it was fine. The bloke even had a look and said "yeah, no worries" ;D
He heard how loud the pipes are, that didn't seem to worry him either.
Maybe he was expecting me to book it in to have the switch fixed there. [laugh]
thats all right for them to say that they dont do the roadworthy speak to some one that does [thumbsup]
I tried it - it works ;D
Bazz - I thought they did do the roadworthy's there ??? At the Duc shop in Launnie?
Do they take the bike somewhere else to get it checked?
they can only do new bikes , unless things have changed [thumbsup]
Hey Meanie,
There are a few places that can do it. I've had two bikes inspected including the monster and had no real problems. They just check the number match, indicators and light, no oil leaks etc and thats about it.
Both on mine were done at Forestry Tas. They have a garage and I had a friend who worked there at the time. Its down behind Freedom Furniture in Hbt.
Call me and I'll arrange it if you haven't done it by now.
another thing dave you have only 30 days to change you rego with a out of state registered vehicle after that if you get pulled up they will fine you for driving an unregistered vehicle and no maib if you have an accident cheers bazz
Thanks Techno, I'll see if I can get it done here up in Launnie this week. If not, I'll let you know.
Bazz, as I understand the rules, you have 3 months to change registration after moving interstate. Then, basically you are driving an un-registered vehicle, and have no insurance.
After getting a roadworthy inspection, it is then valid for 30 days. If it expires, you need to get another inspection.
As I haven't officially moved to Tassie yet, I'm still a Queenslander.
Of course, when the house settles, I will officially become Tasmanian. Then I will need to change rego.
...now waiting for two headed Tasmanian jokes [laugh] [popcorn]
just show them the scare [thumbsup]
i have a scar too does that make me a Tassie girl hehehe [laugh]
Oooooohhhh!! I'll leave that one alone. ;D [roll] [evil] [cheeky] [clap] [evil]
cum on play with me Dragon
ooohhhh ok then, just for you Jukie. [evil] [evil] [evil]
he he he [laugh] [laugh] [laugh] [evil] [evil] [evil]
So.....
After putting various bits and pieces back onto the bike, re-wiring the side stand switch and replacing a bulb, she passed ;D
Tassie plates here we come [thumbsup]
Oh, and the ride to the workshop was rather quiet - most unsettling - I hope that never has to happen again...
After a ride today with Bazz, my tail light has blown again. The brake light still works, it's just the filament for the tail that has gone. I realised when I got home, after dark :-\
I haven't been riding much lately because the weather has been so crap, but the bulb is only 3 days old. I must have a short somewhere or something.
Oh well, just another job, for when the weather turns to shit (this weekend) [roll]
Found on my DS (after blowing around 3 globes [roll] ) that the globe wasnt a tight fit in the socket and it was moving around, probably enough to shake the lit filament and cause it to break. ??? (Maybe on and off earthing?? )
Gave the socket a bit of a squeeze with a pair of multi grips and havent had a problem since! [thumbsup]
Thanks Dragonworld, I adjusted the contacts a little, and now everything seems fine. :)
While I was "re-disabling" the side stand switch, I thought I would add in the diode to the neutral switch.
After some very dodgy soldering, and a burnt finger, everything was all wired up and ready to go. A quick test with the bike up on the rear stand, and everything's sweet. Until the test ride.
It works as it should, ie. starts with stand down in neutral only, and cuts off if put in gear. But the neutral light stays on all the time.
With the engine running, the neutral light is on all the time regardless of gear.
With engine stopped, the light is on in neutral and all gears except first. Weird ???
Could I have spliced into the wrong wire at the side stand switch end?
Or put the diode in backwards?
here ya go dave http://ducatimonsterforum.org/index.php?topic=20576.msg368653#msg368653 (http://ducatimonsterforum.org/index.php?topic=20576.msg368653#msg368653)
how can you refuse an invite like that?
paul.