Yep, selling my Rizoma clip-ons. Randy McCarter got the set off with no difficulty or damage to the individual pieces (obviously helps to know what you're doing [laugh] ).
They do have normal wear associated with approximately 20,000 miles of use. Most all of the wear and/or dings are completely covered when the controls are mounted on the bars (see pix). Once installed, everything you can actually see is in very good condition.
$120.00 (new set is $437.00 over on PJ's Parts). Local pick-up only.
This is the list of bikes that will work with the Rizoma clip-ons (found on PJ's Parts Rizoma page):
Fits: Ducati
• Monster 1000 i.e.
• Monster 400
• Monster 620
• Monster 695
• Monster 750 02
• Monster 800 i.e.
• Monster 900 02
• Monster S2R 1000
• Monster S2R 800
• Monster S4
• Monster S4R -06
• Monster S4R 07-
• Monster S4RS *
*Note: For the S4Rs these clip-ons will mount, but the Gold Preload adjusters will not, as the S4RS has smaller preload adjustment nuts than the standard S4R or S2R.
I'm offering these locally first; if no one is interested by the end of the week (Sunday June 8th), I'll list them over in Marketplace, Parts for Sale.
Thanks for shoppin' ;D
Lisa
(http://i195.photobucket.com/albums/z234/n2f/P1030241.jpg)
More pix:
(http://i195.photobucket.com/albums/z234/n2f/P1030244.jpg)
(http://i195.photobucket.com/albums/z234/n2f/P1030248.jpg)
And summor...
(http://i195.photobucket.com/albums/z234/n2f/P1030246.jpg)
(http://i195.photobucket.com/albums/z234/n2f/P1030242-1.jpg)
And one to grow on [evil]
(http://i195.photobucket.com/albums/z234/n2f/P1030252.jpg)
Do you know if these will fit on an 03 ST4s? It looks as though just the bars would fit without the triple. That is, of course, just by looking at the pictures. If so, I'm interested in checking them out. If they work, SOLD! Where are you in DFW? Feel free to email me at sdlrodeo@yahoo.com
Thanks!
Steve
Flower Mound.
How much lower are these bars over the stock bars?
cdc
Quote from: sdlrodeo on June 04, 2008, 05:47:40 PM
Do you know if these will fit on an 03 ST4s? It looks as though just the bars would fit without the triple. That is, of course, just by looking at the pictures. If so, I'm interested in checking them out. If they work, SOLD! Where are you in DFW? Feel free to email me at sdlrodeo@yahoo.com
Thanks!
Steve
Flower Mound.
Thanks for your interest Steve. I'm not sure if the Rizomas would fit or not. Probaby not because the ST4S bikes have the upgraded Ohlins front forks which are significantly larger in diameter than the "base" Showa tubes on the 620 Monster.
I live in Flower Mound also.
Lisa
Quote from: cdc on June 04, 2008, 05:56:18 PM
How much lower are these bars over the stock bars?
cdc
Charles, the clip-ons lowered the controls about 3/4" - 1." If you can still acces TOB, I did a long write-up with pictures of this mod under the Product Review section.
Lisa
Here is some fittiment information form PJ's Parts web listing of the Rizoma Clip-Ons:
Fits: Ducati
• Monster 1000 i.e.
• Monster 400
• Monster 620
• Monster 695
• Monster 750 02
• Monster 800 i.e.
• Monster 900 02
• Monster S2R 1000
• Monster S2R 800
• Monster S4
• Monster S4R -06
• Monster S4R 07-
• Monster S4RS *
*Note: For the S4Rs these clip-ons will mount, but the Gold Preload adjusters will not, as the S4RS has smaller preload adjustment nuts than the standard S4R or S2R.
Dang, I don't even have a monster and I want these.... They are seriously square-headlight-sexy.... [thumbsup]
Hell, I didn't think these would fit the S2R...
I'll take 'em! [thumbsup]
Quote from: dallas2r on June 04, 2008, 06:53:07 PM
Hell, I didn't think these would fit the S2R...
I'll take 'em! [thumbsup]
SOLD!