http://www.superbikeplanet.com/image/2011/wsc_ama/ (http://www.superbikeplanet.com/image/2011/wsc_ama/)
of Hayes AMA SBK machine versus Melandri's WSBK machine....
Interesting.
What is the device that rides along with the fork, and looks like a very tiny blue fork, or damper?
Sensor for electronics
Quote from: Spidey on February 18, 2011, 11:11:41 AM
Sensor for electronics
More detailed....it tells the electronics where the fork is in it's travel.
Part of it is data-logging for knowing how the suspension is performing, also for electronic wheelie control (if it's legal).
the different swingarms and tanks interested me for some reason....
Quote from: zooom on February 18, 2011, 12:53:21 PM
the different swingarms and tanks interested me for some reason....
(in the past) the worldsbk r1 "tank" was just a cover and the fuel was stored lower in the body w/ the filler in the seat.
i don't think the ama regulations allow that, but i'd have to look to verify.
I read in the April 2011 Sport Rider that Graves sent Hayes tank(s) to Gmeiner Racing Parts in Germany to have them reshaped to better suit his riding style. They didn't get specific on what they did. Also interesting is that Hayes doesn't use any electronic aids. Bascially has them all turned off ala old school style. Kinda neat! [thumbsup] It's a good issue of SR. It's got the write up on Hayes' winning R1 plus rides and write ups by Alan Cathcart on Biaggi's Ape, Corser's Bimmer and Crutchlow's Yammyhammer.
Quote from: derby on February 18, 2011, 02:00:44 PM
i don't think the ama regulations allow that, but i'd have to look to verify.
they don't. unless they changed very recently.
most interesting is the sponsorship/no sponsorship =)
(and the fact that nearly everything about the wsbk version is different)
Aren't there different homologated year bikes for the 2 series?
IE different model years, different bodywork?
Or are all the crossplane R1 bikes the same bodywork?
Quote from: Spidey on February 18, 2011, 11:11:41 AM
Sensor for electronics
Quote from: derby on February 18, 2011, 11:36:52 AM
[thumbsup]
suspension travel
Quote from: Speeddog on February 18, 2011, 11:42:29 AM
More detailed....it tells the electronics where the fork is in it's travel.
Part of it is data-logging for knowing how the suspension is performing, also for electronic wheelie control (if it's legal).
Gotcha. Thanks for the edumacations. [thumbsup]
Quote from: Speeddog on February 19, 2011, 09:47:02 AM
Aren't there different homologated year bikes for the 2 series?
IE different model years, different bodywork?
Or are all the crossplane R1 bikes the same bodywork?
can't swear to it but i think the side cut since '09 has been that more vertical line we see on hayes' bike.
still interested by the new shorty graves pipes..
Quote from: derby on February 18, 2011, 11:36:52 AM
suspension travel
Correct. They use it to datalog the suspension travel for tuning purposes.
Wheelie control uses the same type of "gyroscope on a chip" that the iPhone (or WiiMote, for that matter) uses.
At least that's the DTC model.
Quote from: gm2 on February 19, 2011, 11:51:03 AM
still interested by the new shorty graves pipes..
The Sport Rider article said they were shortened by Graves to make them lighter. Apparently in 2009 the bike was way over the minimum weight so it went on a diet in 2010. Little bit here, little bit there added up to a lighter bike. They said it will be right on the weight limit for the start of the 2011 season.
Quote from: oldfastwin on February 20, 2011, 12:15:38 PM
The Sport Rider article said they were shortened by Graves to make them lighter. Apparently in 2009 the bike was way over the minimum weight so it went on a diet in 2010. Little bit here, little bit there added up to a lighter bike. They said it will be right on the weight limit for the start of the 2011 season.
thx :)