Removed my countershaft sprocket and was wondering if there is a torque value for the bolts on the retaining plate. I have a 2001 M900 with the floating style front sprocket. Was also wondering if Napa Blue threadlock will be good enough for those bolts, or should I use the stronger Red version. Thank you kindly! ;D
I've got the factory manual for the '00 900. It describes 5nM and 'lock 1' for those. Lock 1 is a low strength thread lock.
So basically, hand tight and loc-tite blue. Mine also have lock washers
Quote from: yuu on June 15, 2008, 06:50:43 PM
I've got the factory manual for the '00 900. It describes 5nM and 'lock 1' for those. Lock 1 is a low strength thread lock.
So basically, hand tight and loc-tite blue. Mine also have lock washers
Thank You! I mean, Thank Yuu!