Text only | Text with Images

Ducati Monster Forum

Moto Board => Accessories & Mods => Topic started by: hillbillypolack on February 10, 2012, 05:59:06 PM

Title: Battery box on M900-who fabricates them?
Post by: hillbillypolack on February 10, 2012, 05:59:06 PM
I'm going through the FCR / pods conversion on the M900.  I'd like to keep the airbox intact in case I'd like to use it later.

Does anyone make the battery box (which would also hold the coils, and other details) so I could go about tidying up that area?  I could go about this the long way, or I could use a head start with something ready to go. . . .
Title: Re: Battery box on M900-who fabricates them?
Post by: The Mad King Pepe' on February 14, 2012, 09:42:24 AM
U-shaped sheet of aluminium: cut and drill. Like here: http://www.ducatisuite.com/jetkit.html (http://www.ducatisuite.com/jetkit.html)

You can also try and buy the lower half of the air-box and cut off the parts you don't need.
Title: Re: Battery box on M900-who fabricates them?
Post by: koko64 on February 25, 2012, 01:56:23 AM
Have you called Motowheels? There is a new thread on this.
Title: Re: Battery box on M900-who fabricates them?
Post by: The Bearded Duc on February 25, 2012, 05:03:06 AM
Quote from: koko64 on February 25, 2012, 01:56:23 AM
Have you called Motowheels? There is a new thread on this.
^
This

http://www.ducatimonsterforum.org/index.php?topic=55408.0 (http://www.ducatimonsterforum.org/index.php?topic=55408.0)
Title: Re: Battery box on M900-who fabricates them?
Post by: moto on February 27, 2012, 02:26:13 PM

CNC FABRICATION Battery Box: Monster / SuperSport (CARB Models) (http://motowheels.com/i-8390419-cnc-fabrication-battery-box-monster-supersport-carb-models.html)
Text only | Text with Images