I've read in passing that the filler on these bikes is a common type?
what about the tank flange underneath?
is there another source for this part?
(http://farm5.static.flickr.com/4045/4468245774_16c202f913_b.jpg)
Are you talking about the conical dohicky that *was* in the fill port?
Quote from: Slide Panda on June 06, 2012, 06:31:18 AM
Are you talking about the conical dohicky that *was* in the fill port?
No, the whole metal assembly that the hoses are attached to.
(http://i99.photobucket.com/albums/l309/ducatiz/DMF/th_6562345f.jpg) (http://i99.photobucket.com/albums/l309/ducatiz/DMF/6562345f.jpg)
Pretty sure they are common to all monsters until the 696
yeah, i know that...
but are they used on anything else?
Old SBKs I think 748/916 era
lol i meant anything besides Ducatis...
Nice to know, thanks. I had read that the top part, the one with the cap, could fit the Yammies, but didn't know about the bottom part. [thumbsup]
Quote from: stopintime on June 06, 2012, 07:18:58 AM
Yamaha.
are you sure? i'm talking about the lower part, not the top (top=part that opens)
Quote from: ducatiz on June 06, 2012, 07:53:24 AM
are you sure? i'm talking about the lower part, not the top (top=part that opens)
Sorry - the only thing I know is that the top/outer ring is the same size and bolt configuration. After that, I'm guessing that the cap is similar. Anyway, it could be a smart place to start looking....
http://www.yamaha-motor.com/partviewer/default.aspx?ls=sport#/Yamaha/FZ1_-_FZS10ZB_-_2010/FUEL_TANK/FZS10ZB_(2010_MOTORCYCLE)/FUEL_TANK_(FZS10ZB_-_2010) (http://www.yamaha-motor.com/partviewer/default.aspx?ls=sport#/Yamaha/FZ1_-_FZS10ZB_-_2010/FUEL_TANK/FZS10ZB_(2010_MOTORCYCLE)/FUEL_TANK_(FZS10ZB_-_2010))
Quote from: stopintime on June 06, 2012, 11:53:05 AM
Sorry - the only thing I know is that the top/outer ring is the same size and bolt configuration. After that, I'm guessing that the cap is similar. Anyway, it could be a smart place to start looking....
http://www.yamaha-motor.com/partviewer/default.aspx?ls=sport#/Yamaha/FZ1_-_FZS10ZB_-_2010/FUEL_TANK/FZS10ZB_(2010_MOTORCYCLE)/FUEL_TANK_(FZS10ZB_-_2010) (http://www.yamaha-motor.com/partviewer/default.aspx?ls=sport#/Yamaha/FZ1_-_FZS10ZB_-_2010/FUEL_TANK/FZS10ZB_(2010_MOTORCYCLE)/FUEL_TANK_(FZS10ZB_-_2010))
i saw that the FZR uses the same filler cap, but I think the lower flange is part of the tank... it's not show with a separate part # as on the ducati models..
:(
Your picture shows a metal tank flange?
I assume the plastic tanks are similar to Yamahas with a built in flange.
Did earlier Yamahas have a separate flange on metal tanks with the same cap, perhaps?
plastic tanks have the flange built in.
no idea about the fzr tanks.