Hi my bike is 2000 M750 and the hi-beam button isn't working.
This happen before, then I took it apart, bended the little bronze tab inside the switch to get contact.
Did the same this time but it's not working. Any thoughts?
Thanks!
wire brush the contacts? check the wiring, does the high beam switch work?
Quote from: wannabfast on July 12, 2012, 09:02:41 AM
wire brush the contacts? check the wiring, does the high beam switch work?
wires are solid good...the switch is good.
it seems like there is no contact when I push the button to hold it at hi-beam. Bending the bronze tab wouldn't do it this time around.
is there grounding going on on the bars?
Quote from: wannabfast on July 12, 2012, 12:36:34 PM
is there grounding going on on the bars?
Yeah i thikn so cuz lo-beam horn and turn signals works ;D
Maybe the high beam filament is burned out.
Get a multi-meter and start testing things.
I love it when someone else has the same problem with their bike and gets help before I even have to ask!
Also thankful for all the crusty experienced guys on here with the time, tools, and know-how to help with my lack of all three.