My very kind wife allowed me to "play" with our 695 last winter. Well, this is the result:
(http://i93.photobucket.com/albums/l66/nmaino/2007%20Ducati%20695%20Monster/BeforeAfterTripleClamp.jpg)
(http://i93.photobucket.com/albums/l66/nmaino/2007%20Ducati%20695%20Monster/BeforeAfterSideView.jpg)
(http://i93.photobucket.com/albums/l66/nmaino/2007%20Ducati%20695%20Monster/BeforeAfterRearShock.jpg)
(http://i93.photobucket.com/albums/l66/nmaino/2007%20Ducati%20695%20Monster/BeforeAfterGauges.jpg)
(http://i93.photobucket.com/albums/l66/nmaino/2007%20Ducati%20695%20Monster/BeforeAfterFrontBrake.jpg)
(http://i93.photobucket.com/albums/l66/nmaino/2007%20Ducati%20695%20Monster/BackQuarterView.jpg)
(http://i93.photobucket.com/albums/l66/nmaino/2007%20Ducati%20695%20Monster/AfterAlternatorCover.jpg)
Complete mod list
Front-end:
*Woodcraft 1.5 raised clip-ons
*ST3 top triple
*2004/2005 GSXR 600/750 forks/brakes with Ohlins springs
*S4 rim
*320mm discs
*Brembo master cylinder off an Aprilia RSV
*All spacers made by Some Dude (Thank you!)
Engine:
*Quat-D ExBox ceramic coated black (thanks NoisyDante)
*Open airbox and K&N filter
*ECU tuning via Ducati of Dallas
*14 tooth front sprocket
Rear-end:
*S4 rear rim
*Ohlins shock (46HRCS â€"yes this is made for an ST2/4 and it works great on the Monster)
*Corsair billet axle adjuster plates
*39 tooth rear sprocket
Other:
*LED integrated tail light
*LED Oberon front mini turn signals
*Oberon foot pegs
*Oberon clutch slave cylinder
*Billet front sprocket cover
*Rizoma knockoff “retro†mirrors
*TechSpec tank pads
*ProGrip 717 handlebar grips
*Custom milled timing inspection cover by Some Dude
*Custom white gauge faces
*Custom gauge mounts
*Lowered headlight
Next up is going to be carbon fiber, LED headlight, Ohlins steering damper . . . the list never ends!
[clap]
[thumbsup] Nicely done... Huge improvment. [drink]
Your photos are kinda stretttcched out though.
I know it's wrong, but .... I covet your wife's ExBox! [evil]
Industrious! YOu and SuzyJ should trade notes
Thanks guys. The bike and the project have both been a lot of fun.
Daaaang, that's quite the list of improvements! Cha Ching!
Looking good [thumbsup]
I'll bet it's a ton more fun to ride now.
BK
That's very cool. 695's are the most awesomest monsters ever.
Where did you find the Exbox? Was it a lot of fabrication to install?
I was about to have a custom exhaust created to dump out the side like that under the engine but was concerned with how loud it would be since not many mufflers would fit. It would be ideal if this could fit my bike (also have a 695).
[thumbsup]
Who made the gauge faceplates?
Ever think of removing the side panels to expose the frame more?
You need to fix your pictures. They are so out of proportion I am getting dizzy. [puke]
Overall looks good. [thumbsup]
Quote from: Heath on October 28, 2012, 06:55:27 AM
Who made the gauge faceplates?
Ever think of removing the side panels to expose the frame more?
You need to fix your pictures. They are so out of proportion I am getting dizzy. [puke]
Overall looks good. [thumbsup]
...Same here.
Nice work, tastefully done.