I posted over on the parts wanted, and accessories and mods boards for a source for db killers for my new to me termi high mounts on my 2002 M750sie. I've been looking around, and its seems that the db killers slide in the cans and are retained by a screw/bolt that goes through the can. The cans I have don't have any hole, or from what I can tell, any way to install db killers without drilling.
So, the question is this, were db killers an option on these pipes when they were new, or are they only for more recent exhausts? I don't want to spend time looking for something that doesn't exist.
It's just a question of outlet inner diameter and drilling a hole in your end pipe outlet - then off to ebay or...
http://www.desmoworld.com/shop/de/ducati-monster/m620-m695-m800-m1000/auspuff-6/db-eater-6 (http://www.desmoworld.com/shop/de/ducati-monster/m620-m695-m800-m1000/auspuff-6/db-eater-6)
What stop said.
For my former Ducati Performance high-mounts I matched the I.D. and approximate angle and found something suitable from Mivv at PJs Parts. Had to be special-ordered, but it fit perfectly. Drilled a small hole and added a nut/bolt to secure them.
BK
(http://i45.tinypic.com/66dczp.jpg)
Thank you everybody so much for this thread.
I'll finally be able to not wake up the neighbors with my Sil-Moto high mounts.
Quote from: ajw85 on January 28, 2013, 05:34:51 AM
Thank you everybody so much for this thread.
I'll finally be able to not wake up the neighbors with my Sil-Moto high mounts.
unless you hate your neighbor like me, so i enjoy riding to work with my loud exhaust [evil]