I'm wondering what basket/plates combo you guise are using, how you like it, and what you paid for it.
Bang for buck. ;D
NGR alloy basket (Motowheels)
NGR spring/retainer kit (Motowheels) or Barnett spring/retainer kit (Cal Cycleworks).
Barnett alloy plate kit (Cal Cycleworks)
Use existing drum and pressure plate. Color the pressure plate with VHT engine paint of your choice.
Run a stock clutch cover. VHT color of your choice.
I looked at that...sorta torn between it, and Ducati OE aluminum baskets on eBay for $119 shipped.
Or a lightly used Nichols aluminum basket for $69 + the Barnett red plates
Lots of negative comments about these Barnett plates...and lots of positive as well.
I'd just buy a used OE basket + plates in decent condition if these sellers didn't have the stones to ask up to $350 for em...ffs.
Buying clutch stuff is a PITA.
Some good deals there.
If that Nichols basket really is " lightly used", then thats a good price.
You have joined the dry clutch parts treasure hunt!
Some people have complained about the Barnett friction material, but I've never had a problem with it. There are threads going right into it. I run a closed cover so water doesnt get in. I find the tangs are soft and get hammered before the friction material wears out. Otherwise I do like the feel of those plates. I just hate the noise nowdays.
I ended up getting that Nichols basket for $65, and picked up a new Barnett clutch pack for $147.
The clutch pack had me confused bc of the cheap price, and the listing title......but it's the same sku as both Motowheels and Ca-cycleworks sells, so...I hope it works.
http://www.ebay.com/itm/270607035082?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649 (http://www.ebay.com/itm/270607035082?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649)
This is the basket:
http://www.ebay.com/itm/261193997095?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649 (http://www.ebay.com/itm/261193997095?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649)
Nice basket. Good score.
Not sure if the plates are correct. They are 1098 plates.
306 25 40002 for M900/SS
306 25 40004 for 1098/1098S
Just checked, think I got it right.
Double check the sku.
I think you have the wrong kit.
If they wont fit sell em on.
Oooh nice catch, thanks.
Coulda sworn I double checked. I'll see if he has the right one @ that price.
Now I'm shopping for a slick looking pressure plate...springs...collars...cover. Sigh. Swore I wouldn't do that, haha
Quote from: Rudemouthsky on April 07, 2013, 01:56:50 PM
Oooh nice catch, thanks.
Coulda sworn I double checked. I'll see if he has the right one @ that price.
Now I'm shopping for a slick looking pressure plate...springs...collars...cover. Sigh. Swore I wouldn't do that, haha
We all do, its an addiction of passion. [cheeky]