Today I was riding... at one point the bike just sounded like it add only one piston.... struggle to get home... and once I got there ... no pilot screw to set the air mixture on the carb ... it fell somewere :'(
So now I was looking at the net to order one ..... search for 2 hours no result :'(
doe's someone knows where I could get one or does someone as a spare one ... whit the little spring... [bow_down] [bow_down]
I bet these would work...if you can't find a used one...
http://www.factorypro.com/Prod_Pages/prody85.html (http://www.factorypro.com/Prod_Pages/prody85.html)
Quote from: ducpainter on May 03, 2013, 06:42:14 PM
I bet these would work...if you can't find a used one...
http://www.factorypro.com/Prod_Pages/prody85.html (http://www.factorypro.com/Prod_Pages/prody85.html)
Exactly what I needed tanks ducpainter :-* [bow_down]
ordered :) [popcorn]
Would you know the factory setting's for that carb mukini bdst 38 mm .... 1995 900cc monster ? I think it's 2.5 turn out ? But I'm not sure [thumbsup]
The factory settings are generally pretty lean.
Most people run 3-4 turns out with stock pilot jets with a float level of 14mm.
Adjust it till it idles good.
Plenty other fish in the sea.
Quote from: ducpainter on May 04, 2013, 02:56:36 AM
The factory settings are generally pretty lean.
Most people run 3-4 turns out with stock pilot jets with a float level of 14mm.
Adjust it till it idles good.
tanks for the info [thumbsup]
make sure you put anti seize paste on the threads, as they can seize, and fit the little rubber caps.
134.4.015.1A OR O-ring
134.4.016.1A Washer
134.4.017.1A Spring
134.4.018.1A Adjusting screw
872.4.011.1A Cap
Quote from: brad black on May 04, 2013, 06:54:45 PM
make sure you put anti seize paste on the threads, as they can seize, and fit the little rubber caps.
134.4.015.1A OR O-ring
134.4.016.1A Washer
134.4.017.1A Spring
134.4.018.1A Adjusting screw
872.4.011.1A Cap
tanks all this info .... I"ve actually ordered a complete rebuild kit for a Yamaha TDM850 Wich use the same carb .... pilot jet are the right sizes + I'll have all the o-rings and washers [popcorn]
http://www.nrp-carbs.co.uk/shop/index.php?route=product/product&manufacturer_id=47&product_id=257 (http://www.nrp-carbs.co.uk/shop/index.php?route=product/product&manufacturer_id=47&product_id=257)
I also lost my pilot screw. I will miss her. just trying to figure out how to get cheap airline tickets again is tough! [cheeky]
Quote from: Skybarney on May 07, 2013, 07:12:54 AM
I also lost my pilot screw. I will miss her. just trying to figure out how to get cheap airline tickets again is tough! [cheeky]
[laugh] I hope you find another gal ..... [thumbsup] keep hope and never give up ...theres a lot of cute flight attendant out there [laugh]
^^^ Lol. Got a girl but it was fun to say anyway [thumbsup]
Quote from: Skybarney on May 08, 2013, 09:04:07 AM
^^^ Lol. Got a girl but it was fun to say anyway [thumbsup]
I noticed ..lol [cheeky] it was just fun responding [laugh]
I've receive my rebuilt kit and it's installed [thumbsup] ....
-engine run's smooth
-better millage
-and no poping from the exaust
just a superb rebuilt kit ... best mod I've done so far.... [clap]
I may I've lost my pilot screw but the carb add the chance to sleep in my bedroom for one nigth [laugh] lol
(http://i1121.photobucket.com/albums/l517/jfran745218/Photos-0055_zpsed018019.jpg)
(http://i1121.photobucket.com/albums/l517/jfran745218/Photos-0060_zps4988cd9f.jpg)
Here's a few photo's......because i like photos... [popcorn]