Hi all-
When the ball of my foot is on the pegs (stock rearsets) and my knees pressed into the tank my right heel presses up against the heat shield on the exhaust down tubes. I would like more room on the right side, so the question is: what exhaust (down tubes/mid pipe) set up will either tuck in tighter than stock or be moved rearward? I am still debating an under the tail or shotgun style system - I am open minded about either of those, and if one will give me more room I will go that route. I don't want the boomtube/Ebox set up, but I understand that will fix my issue. Am I going to have to have the downtubes custom bent? Any and all advice welcome! Thanks.
Dan
you are not in luck - a custom bend is exactly the only thing that will work unless you go with a boom tube or x box exhaust.
My Sidis have a nice melty patch from my zards before i put a guard on them. Just life i guess.
I just put some hi temp sealant on the part of my boot that rubbed up against my Zards and its worked out for me. Life is what you make of it I guess