Hey guys.
Spoke to some folks at Revzilla that have the same bike ('06 S2R Dark 800) [thumbsup] and he suggested I can rig up my
fender eliminator. I was about to buy Competition Werks, and he mentioned he just made his own.
Anyone know of great interactive "how to video" to install / possibly create your own fender eliminator kit?
I just received the moto dynamic integrated tail light and would like to install. I watched an instructional video from monstertailchop.com
but it required cutting. Is there any way around this? or does the back support frame under the seat need to be cut?
Thank a mil.
It's nice out today and was looking to devote it to my girl. Charlotte ;D
Pics to follow after I wash her today.
Looking through posts and on eBay, I've seen home made ones if you have metal working tools. Doesn't look too hard for a small bracket that you can make to bolt into existing holes. I ordered one but that's because I have no tools for such a project.
I just rolled my own, using 1.6 and 2mm aluminium sheet. I've gotta anodise it yet, but it looks okay.
(https://lh4.googleusercontent.com/-KY3vYsqb-70/UYSltFA7TII/AAAAAAAACX8/9KpHKLyzS-0/w1644-h1092/DSC_3470.JPG)
(https://lh4.googleusercontent.com/-htOVy12Sjqw/UZInkqABFeI/AAAAAAAACks/3cx1-f9ABBA/w1644-h1092-no/DSC_3480.JPG)
Of course you have to get the hacksaw out, and remove a kilo or so of frame too.
(https://lh5.googleusercontent.com/-rgIYEr5v4nM/T5NLANc5BrI/AAAAAAAABN0/f1idTv4c3VE/s1223/DSC_3016.JPG)