Hey All,
Looking to swap out the turn signals on my 2009 Monster 696. I've seen the Ducati Performance LED turn signals but they are way to small in size, visually I don't like that, especially on the front of the bike. Can anyone recommend some turn signals that are a little smaller then the stock signal but not as small as performance LEDs?
For the rear signals I want to get an integrated tail light and removing the rear turn signals completely. I was looking at the one offered by motodynamics.com does anyone have any experience with these? Also do they sell tail tidies/ fender eliminators without the posts for turn signals?
Thanks a lot guys!
http://www.monsterparts.com/pc/ES181/Elec-Signals/ES181.html (http://www.monsterparts.com/pc/ES181/Elec-Signals/ES181.html)
http://www.monsterparts.com/pc/D-9MT/Elec-Head-Tail/D-9MT.html (http://www.monsterparts.com/pc/D-9MT/Elec-Head-Tail/D-9MT.html)
hope this helps . . . and btw, Jeff's a great guy to deal with . . .
I have the Barracuda non-LED signals on the front, and the motodynamics clear integrated tail light in back. Both from monsterparts.com. Couldn't be happier with both. I went with non-LED signals to simplify the installation, and based on reviews noting how bright they are. These will easily rival any LED in output.
I have Barracuda front signals on the front of mine and my wife's bike, as well as the MotoDynamics integrated tail on both. All from JEFF at Monsterparts. [thumbsup]
Can't go wrong!
I have the Oberon billet LED's in and love em'. One of the few parts that are making it on to my new bike. This is a large image you should be able to zoom up pretty good:
(http://i57.photobucket.com/albums/g234/247prophet/new1_zpsf70fa043.jpg~original)