Text only | Text with Images

Ducati Monster Forum

Moto Board => Tech => Topic started by: Goggles Pizano on July 15, 2008, 08:19:14 PM

Title: Can I swap bearings to use 17mm wheel on 25mm axle?
Post by: Goggles Pizano on July 15, 2008, 08:19:14 PM
Seems a simple enough swap.  Have older wheel, want to use on newer monster...  Can I just press out the old bearings and press in then new to use this wheel on my bike?

Thanks.
Title: Re: Can I swap bearings to use 17mm wheel on 25mm axle?
Post by: Goggles Pizano on July 31, 2008, 10:58:10 AM
Bump.

Clarified the question.
Title: Re: Can I swap bearings to use 17mm wheel on 25mm axle?
Post by: Ddan on July 31, 2008, 05:18:54 PM
I'm not sure it it's universal, but on mine the 17mm bearings were 14mm deep, and the 25mm ones were 12. I was trying to use a newer wheel on a 17mm axle so I had to take 2mm out of the bearing seats and make a new spacer.
Title: Re: Can I swap bearings to use 17mm wheel on 25mm axle?
Post by: 64duc on August 01, 2008, 12:46:18 PM
Knock out one bearing from the wheel you want to use and walk it , the wheel , and the axle to your local bearing house. If there is one that is a direct fit, they can get it for you.
Text only | Text with Images