Ducati Monster Forum

After hacking one clutch case to bits I decided to do another one slightly differently.

First one:

(http://i1286.photobucket.com/albums/a615/Yorkie13/Ducati%20Monster/IMG_1390_zpsoqbrafim.jpg) (http://s1286.photobucket.com/user/Yorkie13/media/Ducati%20Monster/IMG_1390_zpsoqbrafim.jpg.html)

The next one was a cheap buy, so I started with drilling the corner holes by hand:

(http://i1286.photobucket.com/albums/a615/Yorkie13/Ducati%20Monster/Cafe%20Racer/IMG_1484_zpsfuxmbwnn.jpg) (http://s1286.photobucket.com/user/Yorkie13/media/Ducati%20Monster/Cafe%20Racer/IMG_1484_zpsfuxmbwnn.jpg.html)

I then drilled out the middle:

(http://i1286.photobucket.com/albums/a615/Yorkie13/Ducati%20Monster/Cafe%20Racer/IMG_1485_zps1ac2re2i.jpg) (http://s1286.photobucket.com/user/Yorkie13/media/Ducati%20Monster/Cafe%20Racer/IMG_1485_zps1ac2re2i.jpg.html)

The rest was hand filed:

(http://i1286.photobucket.com/albums/a615/Yorkie13/Ducati%20Monster/Cafe%20Racer/IMG_1486_zpsja4c6kjt.jpg) (http://s1286.photobucket.com/user/Yorkie13/media/Ducati%20Monster/Cafe%20Racer/IMG_1486_zpsja4c6kjt.jpg.html)

Once tidied up and finished it looked okay:

(http://i1286.photobucket.com/albums/a615/Yorkie13/Ducati%20Monster/Cafe%20Racer/IMG_1489_zpseewubrdf.jpg) (http://s1286.photobucket.com/user/Yorkie13/media/Ducati%20Monster/Cafe%20Racer/IMG_1489_zpseewubrdf.jpg.html)

Off to powder coat on Monday.

Yorkie

You built the case? 

Quote from: kopfjäger on January 23, 2016, 11:07:42 AM
You built the case? 

I wish!

No just vandalised it.

 [thumbsup]

Looks much better than the first one. Nice job!

Beauty!

Quote from: MashBill on January 23, 2016, 12:22:41 PM
Looks much better than the first one. Nice job!

I am running the first one on the ST2 engine (this will be in the Monster) and the second one will go in my Cafe Racer project.

Yorkie

mmmmmm. I likey