I've got a CycleCat top triple clamp for my 2000 M900, powder coated black, looks good. The stock lower triple just isn't cutting it. Might just have it powder coated black, but otherwise considering a replacement, wondering if any of these could fit?
From a 2013 Monster 1100 Evo, and supposedly also fits a 696 and 796.
http://www.ebay.com/itm/2013-Ducati-Monster-1100-EVO-Lower-Triple-Tree-Clamp-696-796-/262147800401?hash=item3d0939fd51:g:xS0AAOSwT4lWSrst (http://www.ebay.com/itm/2013-Ducati-Monster-1100-EVO-Lower-Triple-Tree-Clamp-696-796-/262147800401?hash=item3d0939fd51:g:xS0AAOSwT4lWSrst)
From a 2007 S4R. This looks very similar to mine - maybe the same but just powder coated?
http://www.ebay.com/itm/Ducati-Monster-S4R-2007-Lower-Triple-Tree-Clamp-Yoke-Steering-Head-342-2-015-1CB-/231813152908?hash=item35f924008c:g:8roAAOSwJkJWls6f&vxp=mtr (http://www.ebay.com/itm/Ducati-Monster-S4R-2007-Lower-Triple-Tree-Clamp-Yoke-Steering-Head-342-2-015-1CB-/231813152908?hash=item35f924008c:g:8roAAOSwJkJWls6f&vxp=mtr)
From a 2015 Monster 821
http://www.ebay.com/itm/15-2015-Ducati-821-monster-lower-triple-tree-fork-shock-mount-clamp-/311545345549?hash=item48898cb60d:g:dg0AAOSwzgRWu8Hb&vxp=mtr (http://www.ebay.com/itm/15-2015-Ducati-821-monster-lower-triple-tree-fork-shock-mount-clamp-/311545345549?hash=item48898cb60d:g:dg0AAOSwzgRWu8Hb&vxp=mtr)
I prefer the more billet look of the 1100 Evo and the 821 lower triples (maybe they are the same?), without the billet price.
Thanks for weighing in. [thumbsup]
If I am not mistaken, your frame has the smaller headstock diameter, NONE of those would fit . . .
Either you would need to special order the OEM one thru a dealer or maybe one of our builders here can show in a different direction
This is what you are looking for:
http://www.ebay.com/itm/DUCATI-oem-EARLY-93-2001-MONSTER-LOWER-TRIPLE-CLAMP-750-900-/252287134086?hash=item3abd7c2986:g:m-QAAOSwkNZUjSII&vxp=mtr (http://www.ebay.com/itm/DUCATI-oem-EARLY-93-2001-MONSTER-LOWER-TRIPLE-CLAMP-750-900-/252287134086?hash=item3abd7c2986:g:m-QAAOSwkNZUjSII&vxp=mtr)
All 3 of those will not fit.
Ok thanks guys. Naturally it just can't be that easy to swap out with another model year :( I'll likely powder coat mine, unless there's something aftermarket that doesn't cost an arm and a leg.
Make sure the inner part isn't coated causing a tight fit for your forks.