I didn't make this one, but I have the program to produce them.
Should I? Or is this a dumb idea that nobody wants?
What's your price point for something like this?
Billet aluminum machined on a $200k lathe so don't come at me with $2.00 or something like that [laugh]
Yes it works with twist off as well.
(http://i2.photobucket.com/albums/y25/900rider/SMT/IMG_20160418_192211_zpsfpgb5a74.jpg) (http://s2.photobucket.com/user/900rider/media/SMT/IMG_20160418_192211_zpsfpgb5a74.jpg.html)
(http://i2.photobucket.com/albums/y25/900rider/SMT/IMG_20160418_192153_zpst1zfqsen.jpg) (http://s2.photobucket.com/user/900rider/media/SMT/IMG_20160418_192153_zpst1zfqsen.jpg.html)
(http://i2.photobucket.com/albums/y25/900rider/SMT/IMG_20160418_192202_zpsue0hibgg.jpg) (http://s2.photobucket.com/user/900rider/media/SMT/IMG_20160418_192202_zpsue0hibgg.jpg.html)
I'm in, $25-30?
Does it come with instructions?
[laugh] [laugh] [laugh] [laugh]
Quote from: ducpainter on April 18, 2016, 04:46:44 PM
Does it come with instructions?
In case of emergency, drink?
Quote from: kopfjäger on April 18, 2016, 04:45:42 PM
I'm in, $25-30?
Yeah that's kind of where they'd probably be I think.
I'd buy one even though I don't drink beer.
I'd buy one just because even though I cant figure out how it works.
Quote from: howie on April 18, 2016, 09:01:02 PM
I'd buy one just because even though I cant figure out how it works.
Bring it to DIMBY and Kev will train you. ;D
8) 8) 8)
What size tires it take?
A tire would add a nice cushion. It'll protect both the opener and my lily-white hands.
Being aluminum, I feel like the non-twist-off side, the side for popping a cap, would get pretty chewed up by the points on the caps.
You should probably make them out of titanium. [evil]
Hmmm, production costs...
I think we can engineer this one out. What about a case hardened steel insert on the popper side?
My popper side seems to be holding up just fine. It gets some marks but it's not chewed up badly.
I can do a titanium version. Not for $25 though ;)
Quote from: Monsterlover on April 20, 2016, 12:30:27 PM
My popper side seems to be holding up just fine. It gets some marks but it's not chewed up badly.
I can do a titanium version. Not for $25 though ;)
$26? ;D
[laugh]
I should have expected that
Quote from: Slide Panda on April 19, 2016, 09:34:05 AM
What size tires it take?
50 series fits quite nicely.
(https://farm3.staticflickr.com/2030/5791171087_f511a2f391_z.jpg)
:o
What size beer does that open?!?
Quote from: Monsterlover on April 20, 2016, 06:22:39 PM
:o
What size beer does that open?!?
About this big. You have to bring the bottle to the opener.
(http://socked.co.uk/wp-content/uploads/2012/11/giant-beer-bottle-socked.jpeg)
LOL! [laugh]
I'm in, but I'd like mine with scale 4x108 bolt pattern... :D
Thats a great outside table BTW....I've had one for over 15 years!
oh, and is that bottle opener machined out of an old bike part?
Quote from: herm on May 03, 2016, 07:11:22 PM
Thats a great outside table BTW....I've had one for over 15 years!
oh, and is that bottle opener machined out of an old bike part?
Aluminum bar stock ;)
Quote from: Monsterlover on May 04, 2016, 08:26:38 AM
Aluminum bar stock ;)
Which will cost how much per unit? (I gots to have one!) [thumbsup]
Quote from: Duck-Stew on May 04, 2016, 10:19:27 AM
Which will cost how much per unit? (I gots to have one!) [thumbsup]
http://www.ducatimonsterforum.org/index.php?topic=73276.msg1349345#msg1349345 (http://www.ducatimonsterforum.org/index.php?topic=73276.msg1349345#msg1349345)
Quote from: Duck-Stew on May 04, 2016, 10:19:27 AM
Which will cost how much per unit? (I gots to have one!) [thumbsup]
Depends on how many I'm making...
Rope some friends in ;)
Quote from: ducpainter on May 04, 2016, 10:20:56 AM
http://www.ducatimonsterforum.org/index.php?topic=73276.msg1349345#msg1349345 (http://www.ducatimonsterforum.org/index.php?topic=73276.msg1349345#msg1349345)
That was a ball-park. I didn't know if a more exact figure had surfaced.
Have you tried posting on the H.A.M.B.?!? You'll get a *LOT* of orders on there (I'm wagering...)
I'm in for 2 of them. Trying to get someone else @ work roped in too...
I'll need at least three, maybe more, to give as gifts.
I did not reply, I thought it was a given that I would want one. Or two!
I'll take 2 . . .
Kev, just a question, will they be Al or SS? Just asking I purchase mainly European beers that DO NOT come with twist off and Al has proven to "eat itself away" . . .
As said, just a question
Aluminum. Will work for twist off or top popping.
ok, thanks . . I would like 2 still . . .
Are they done yet?
Not exactly. It depends on your definition of done.
Or yet.
$32.50 shipped to the lower 48.
I need to book 50 to get it going. I'll make some extras to accommodate the stragglers.
I'll also ship outside the states but would have to figure an actual cost.
If you want more than one $32.50 + $27 for every additional as long as they all fit in a small flat rate box.
Spread the word to other forums too if you could. I feel like getting 50 from the DMF might be tough.
I'll take 10.
[laugh]
You don't do things by halves, do you?
I dig that.
You only get one crack at this make the beast with two backser so, nope. ;)
Quote from: Monsterlover on May 07, 2016, 04:04:05 PM
$32.50 shipped to the lower 48.
I need to book 50 to get it going. I'll make some extras to accommodate the stragglers.
I'll also ship outside the states but would have to figure an actual cost.
If you want more than one $32.50 + $27 for every additional as long as they all fit in a small flat rate box.
Spread the word to other forums too if you could. I feel like getting 50 from the DMF might be tough.
Deal . . . shipping to FL
Quote from: kopfjäger on May 07, 2016, 04:06:40 PM
I'll take 10.
Quote from: Monsterlover on May 07, 2016, 04:07:24 PM
[laugh]
You don't do things by halves, do you?
I dig that.
He's a lucky guy to have 10 friends. [cheeky]
I'll take 3.
37 more to go.
I'll take one....
2
Quote from: DarkMonster620 on May 07, 2016, 04:10:09 PM
Deal . . . shipping to FL
Just to clear things up...
Quote from: Monsterlover on May 07, 2016, 04:04:05 PM
$32.50 shipped to the lower 48.
Florida is in the lower 48. ;D
In for 3 [thumbsup]
Quote from: ducpainter on May 07, 2016, 05:21:07 PM
Just to clear things up...
Florida is in the lower 48. ;D
he might think he needs to quote overseas shipping . . . ;D
Quote from: Monsterlover on May 07, 2016, 04:04:05 PM
$32.50 shipped to the lower 48.
I need to book 50 to get it going. I'll make some extras to accommodate the stragglers.
I'll also ship outside the states but would have to figure an actual cost.
If you want more than one $32.50 + $27 for every additional as long as they all fit in a small flat rate box.
Spread the word to other forums too if you could. I feel like getting 50 from the DMF might be tough.
Quote from: kopfjäger on May 07, 2016, 04:06:40 PM
I'll take 10.
We need a list...
1) Kopf... 10
2) dp ... 3
3) Speedbag 1
4) LMT... 2
5) zach...3
Quote from: DarkMonster620 on May 07, 2016, 05:44:12 PM
he might think he needs to quote overseas shipping . . . ;D
are you speaking Spanish?
He said the lower 8 which implies he might need more money for shipping elsewhere. pm him if you want one shipped to Oz...or Norway...but FL is lower 48.
Quote from: ducpainter on May 07, 2016, 05:49:02 PM
We need a list...
1) Kopf... 10
2) dp ... 3
3) Speedbag 1
4) LMT... 2
5) zach...3
are you speaking Spanish?
He said the lower 8 which implies he might need more money for shipping elsewhere. pm him if you want one shipped to Oz...or Norway...but FL is lower 48.
6) Carlos 2
1) Kopf... 10
2) dp ... 3
3) Speedbag 1
4) LMT... 2
5) zach...3
6) Carlos 2
7) DirtyDuc... 2
Total so far: 23
Almost halfway there...
1) Kopf... 10
2) dp ... 3
3) Speedbag 1
4) LMT... 2
5) zach...3
6) Carlos 2
7) DirtyDuc... 2
8) howie 3
Total so far: 26
Quote from: howie on May 07, 2016, 06:51:07 PM
1) Kopf... 10
2) dp ... 3
3) Speedbag 1
4) LMT... 2
5) zach...3
6) Carlos 2
7) DirtyDuc... 2
8) howie 3
Total so far: 26
9) Duck-Stew: 3
New total: 29
Ya'all suck at lists... ;D
1) Kopf... 10
2) dp ... 3
3) Speedbag 1
4) LMT... 2
5) zach...3
6) Carlos 2
7) DirtyDuc... 2
8) 8) howie 3
9) Duck-Stew: 3
New total: 29
They're just excited
Quote from: Monsterlover on May 08, 2016, 03:29:35 PM
They're just excited
I might get excited when you say you ordered material. ;D
;D
are they done yet?
It depends on your definition of done.
Or yet.
Deja vu...
Quote from: ducpainter on May 08, 2016, 03:28:46 PM
Ya'all suck at lists... ;D
1) Kopf... 10
2) dp ... 3
3) Speedbag 1
4) LMT... 2
5) zach...3
6) Carlos 2
7) DirtyDuc... 2
8) 8) howie 3
9) Duck-Stew: 3
10) MikeZ 2
total 31
1) Kopf... 10
2) dp ... 3
3) Speedbag 1
4) LMT... 2
5) zach...3
6) Carlos 2
7) DirtyDuc... 2
8 howie 3
9) Duck-Stew: 3
10) Mike Z: 2
Quote from: Duck-Stew on May 09, 2016, 01:32:39 PM
1) Kopf... 10
2) dp ... 3
3) Speedbag 1
4) LMT... 2
5) zach...3
6) Carlos 2
7) DirtyDuc... 2
8 howie 3
9) Duck-Stew: 3
10) Mike Z: 2
11) alfisti: 1
I'll take delivery at DIMBY as to save on shipping costs [thumbsup]
I'll pick mine up at DIMBY too.
You're unclear on how this list thing works, ain't ya?
Quote from: Oldfisti on May 14, 2016, 07:54:07 AM
11) alfisti: 1
I'll be getting mine at dimby so put my shipping costs towards the next purchaser [thumbsup]
1) Kopf... 10
2) dp ... 3
3) Speedbag 1
4) LMT... 2
5) zach...3
6) Carlos 2
7) DirtyDuc... 2
8 howie 3
9) Duck-Stew: 3
10) Mike Z: 2
11) alfisti: 1
12) Satellite Smithy: 1
I will not pick mine up at dimby-airport security hates me.
1) Kopf... 10
2) dp ... 3
3) Speedbag 1
4) LMT... 2
5) zach...3
6) Carlos 2
7) DirtyDuc... 2
8 howie 3
9) Duck-Stew: 3
10) Mike Z: 2
11) alfisti: 1
12) Satellite Smithy: 1
13) red baron: 3
https://youtu.be/ZyKN8OzzO8s
I'll take 1
Make it 2.
MD doesn't quite get it either...
1) Kopf... 10
2) dp ... 3
3) Speedbag 1
4) LMT... 2
5) zach...3
6) Carlos 2
7) DirtyDuc... 2
8 howie 3
9) Duck-Stew: 3
10) Mike Z: 2
11) alfisti: 1
12) Satellite Smithy: 1
13) red baron: 3
14) Mendo Dave...2
38 down...how many left to go Kev?
50 to hold the price
1) Kopf... 10
2) dp ... 3
3) Speedbag 1
4) LMT... 2
5) zach...3
6) Carlos 2
7) DirtyDuc... 2
8 howie 3
9) Duck-Stew: 3
10) Mike Z: 2
11) alfisti: 1
12) Satellite Smithy: 1
13) red baron: 3
14) Mendo Dave...2
15) Lethe...1 (4 lug to fit the Miata? [cheeky] )
39
+2!
[thumbsup]
1) Kopf... 10
2) dp ... 3
3) Speedbag 1
4) LMT... 2
5) zach...3
6) Carlos 2
7) DirtyDuc... 2
8 howie 3
9) Duck-Stew: 3
10) Mike Z: 2
11) alfisti: 1
12) Satellite Smithy: 1
13) red baron: 3
14) Mendo Dave...2
15) Lethe...1 (4 lug to fit the Miata? cheeky )
16) Jaman...2
41
Not as cool as the wheel, but I picked this up the other day.
(http://i1201.photobucket.com/albums/bb347/dapaoli/IMG_1397_zpsywbnspne.jpg) (http://s1201.photobucket.com/user/dapaoli/media/IMG_1397_zpsywbnspne.jpg.html)
Still cool
Klein Tools makes one just like that too. ;)
This one is kind of cool. Not one I have though.
(http://i.ebayimg.com/images/g/LSIAAOSwHnFViU1d/s-l300.jpg)
C'mon kids, we need more buyers.
I'm in for two.
Does that help?
Where's that put the count? 41?
If I can't get these as "late" holiday presents at the latest, I'm gonna hafta reduce my order from 3 to 1
So, what's that min cut-off again?!?
50 to hit that price point.