I'm usually a succesful googleur, but this is not going anywhere [bang]
Three of four Termi straps were damaged last year.
Termi: no. Dealer: no.
Suggestions?
(I measure them at 314 mm minus a couple mm gap. ~60 mm between the six holes.)
(http://i329.photobucket.com/albums/l394/stopintime/An%20opportunity/Opportunities%20016_zpsyvoudg35.jpg)
(http://i329.photobucket.com/albums/l394/stopintime/An%20opportunity/Opportunities%20015_zpsjz50gku1.jpg)
Someone else needed some and ran into the same problem. http://www.ducatimonsterforum.org/index.php?topic=72680.msg1339376#msg1339376 (http://www.ducatimonsterforum.org/index.php?topic=72680.msg1339376#msg1339376)
I believe Jeff at Monster parts had a set left over from a warranty claim. Couldn't hurt to ask. :-\
Call M4, he might be able to help.
How about these?
http://www.pjengineering.co.uk/products.php?cat=24 (http://www.pjengineering.co.uk/products.php?cat=24)
Quote from: stopintime on May 12, 2016, 02:23:24 PM
M4 ?
http://www.m4exhaust.com/index.html (http://www.m4exhaust.com/index.html)
Quote from: Speeddog on May 12, 2016, 02:42:00 PM
How about these?
http://www.pjengineering.co.uk/products.php?cat=24 (http://www.pjengineering.co.uk/products.php?cat=24)
That should do it.
Quote from: Speeddog on May 12, 2016, 02:42:00 PM
How about these?
http://www.pjengineering.co.uk/products.php?cat=24 (http://www.pjengineering.co.uk/products.php?cat=24)
Already asked - they only have generic ones - not those which look similar :(
Quote from: kopfjäger on May 12, 2016, 02:45:40 PM
http://www.m4exhaust.com/index.html (http://www.m4exhaust.com/index.html)
I'll click/call and .....
M4 weren't able to help.
Not PJEngineering either.
[coffee]
The manufacturers are going by part numbers - even if Arrow could have some that fit, I can't find them without breaking into their warehouse - in Italy.
http://www.eagle-exhaust.com/Stainless-Steel-Reinforcing-Band-round-Black-Velvet (http://www.eagle-exhaust.com/Stainless-Steel-Reinforcing-Band-round-Black-Velvet)
Quote from: kopfjäger on May 13, 2016, 01:56:01 PM
http://www.eagle-exhaust.com/Stainless-Steel-Reinforcing-Band-round-Black-Velvet (http://www.eagle-exhaust.com/Stainless-Steel-Reinforcing-Band-round-Black-Velvet)
I asked them a question about the measurements - we'll see....
Thanks, interesting link [thumbsup]
I'll continue hunting Termignoni, or equal, straps with the cut outs and correct hole spacing, but for now I'm ordering these plain straps [thumbsup]
http://www.ebay.co.uk/itm/Universal-BSAU-Marked-Rivet-Strap-Plain-Strap-4mm-Rivets-Exhaust-Can-400x15-/161507411144?hash=item259a9784c8:g:iCYAAOSw7ThUfz~s (http://www.ebay.co.uk/itm/Universal-BSAU-Marked-Rivet-Strap-Plain-Strap-4mm-Rivets-Exhaust-Can-400x15-/161507411144?hash=item259a9784c8:g:iCYAAOSw7ThUfz~s)
I got some from kerker ( supertrap) when I was looking for replacements for my ferracci forza cans but the spacing was wrong. I ended up reusing the originals. I'd be happy to measure them up and if they work, I could send them your way...
Quote from: ducriderinct on January 31, 2017, 08:12:36 PM
I got some from kerker ( supertrap) when I was looking for replacements for my ferracci forza cans but the spacing was wrong. I ended up reusing the originals. I'd be happy to measure them up and if they work, I could send them your way...
Yes, please do [thumbsup]
Quote from: stopintime on May 20, 2016, 08:50:28 AMI'll continue hunting Termignoni, or equal, straps with the cut outs and correct hole spacing, but for now I'm ordering these plain straps [thumbsup]
http://www.ebay.co.uk/itm/Universal-BSAU-Marked-Rivet-Strap-Plain-Strap-4mm-Rivets-Exhaust-Can-400x15-/161507411144?hash=item259a9784c8:g:iCYAAOSw7ThUfz~s (http://www.ebay.co.uk/itm/Universal-BSAU-Marked-Rivet-Strap-Plain-Strap-4mm-Rivets-Exhaust-Can-400x15-/161507411144?hash=item259a9784c8:g:iCYAAOSw7ThUfz~s)
How did these work out?
Quote from: greenohawk69 on February 09, 2017, 07:56:36 AM
Hiw did these work out?
Ok, I guess... they are closer to mirror/chrome finish than stock and had to be drilled. Not ideal, but ok.
Thanks.
Quote from: stopintime on February 09, 2017, 10:14:15 AM
Ok, I guess... they are closer to mirror/chrome finish than stock and had to be drilled. Not ideal, but ok.
hit them up with a scotch brite pad and you can get a stainless look
Quote from: Heath on February 09, 2017, 06:11:59 PM
hit them up with a scotch brite pad and you can get a stainless look
My plan was to wait and see if nature would fix them, but now I'll try your suggestion [thumbsup]
Quote from: stopintime on February 09, 2017, 06:27:47 PM
My plan was to wait and see if nature would fix them, but now I'll try your suggestion [thumbsup]
Make sure to only go in one direction. I don't think you'd like a crosshatch. ;)
Quote from: ducpainter on February 09, 2017, 06:29:53 PM
Make sure to only go in one direction. I don't think you'd like a crosshatch. ;)
You don't know that.... Today I like cough syrup with morphine... Tomorrow maybe crosshatch... I'm a hippie now 8)
Quote from: stopintime on February 09, 2017, 07:33:20 PM
You don't know that.... Today I like cough syrup with morphine... Tomorrow maybe crosshatch... I'm a hippie now 8)
Nope...I don't know that. I thought that.
Shows you where thought will get you. :P
Knock yourself out.