Text only | Text with Images

Ducati Monster Forum

Moto Board => Tech => Topic started by: greenohawk69 on July 21, 2016, 10:59:38 AM

Title: Semi-Floating OEM Rotors to Full-Floating
Post by: greenohawk69 on July 21, 2016, 10:59:38 AM
My search is not turning up anything on making the OEM semi-floating rotors, full-floating. I found it previously, but the search button is winning.

I recall about using sockets to lift off the ground and hit it with a BFH. This would be the back of the rotor to "mash / loosen" the washer in between the rotor bolt and rotor / carrier.

Sent from my SM-G860P using Tapatalk

Title: Re: Semi-Floating OEM Rotors to Full-Floating
Post by: Speeddog on July 21, 2016, 11:58:33 AM
If you turn off that "SM-BFD Tapachappa" sig line, I'll tell you.

;)
Title: Re: Semi-Floating OEM Rotors to Full-Floating
Post by: ducpainter on July 21, 2016, 03:06:23 PM
Quote from: Speeddog on July 21, 2016, 11:58:33 AM
If you turn off that "SM-BFD Tapachappa" sig line, I'll tell you.

;)
...and if he doesn't turn it off...

I'll uninstall tapatalk. ;D
Title: Re:
Post by: greenohawk69 on July 21, 2016, 08:23:14 PM
Lol. Done - apparently it is an auto setup for the app.
Title: Re: Semi-Floating OEM Rotors to Full-Floating
Post by: Speeddog on July 23, 2016, 08:41:13 AM
Yep, automatic advertising.

Here you go!
http://www.ducatimonsterforum.org/index.php?topic=1818.0 (http://www.ducatimonsterforum.org/index.php?topic=1818.0)
Title: Re:
Post by: greenohawk69 on July 24, 2016, 08:40:18 PM
Thanks.
Title: Re:
Post by: greenohawk69 on August 21, 2016, 10:50:34 AM
This is an easy "mod" to perform. Used a regular hammer and one rotor took 3-4 whacks and the second took 6-7.
Text only | Text with Images