Text only | Text with Images

Ducati Monster Forum

Moto Board => Accessories & Mods => Topic started by: Pazzo on April 18, 2018, 05:23:03 PM

Title: Ducabike Rear-set Disassembly Help Needed Monster 1200/821
Post by: Pazzo on April 18, 2018, 05:23:03 PM
I bought a set of Ducabike rear-sets and can’t get the important piece needed to disassemble the stock set. It is a large inverse hex socket. I have checked everywhere locally and nobody has one. Does anyone here have one they will give, lend, rent, or sell?  I’ll pay shipping both ways if I can borrow one.

Thanks for the help.

(https://uploads.tapatalk-cdn.com/20180419/fb445f1e37966221efe0d188c2e7c6a4.jpg)
Title: Re: Ducabike Rear-set Disassembly Help Needed Monster 1200/821
Post by: scaudill on April 19, 2018, 06:37:14 AM
Maybe you can find a proper size hex nut that fits.  Have a 3/8 or 1/2 socket welded on. 
Title: Re: Ducabike Rear-set Disassembly Help Needed Monster 1200/821
Post by: DarkMonster620 on April 19, 2018, 08:40:07 AM
24mm
Title: Re: Ducabike Rear-set Disassembly Help Needed Monster 1200/821
Post by: ducpainter on April 19, 2018, 11:00:24 AM
https://store.snapon.com/Hand-Sockets-1-2-Drive-External-Hex-24-mm-Socket-P642959.aspx

A little pricey, but free shipping.

I'm sure you can find one cheaper.
Title: Re: Ducabike Rear-set Disassembly Help Needed Monster 1200/821
Post by: Speeddog on April 19, 2018, 11:11:03 AM
https://www.amazon.com/Motion-Pro-08-0397-Chrome-Axle/dp/B009D3FPSM

Or one like it.
Also available in aluminum.
Title: Re: Ducabike Rear-set Disassembly Help Needed Monster 1200/821
Post by: NAKID on April 26, 2018, 03:34:35 PM
I have one from when I changed mine to the gecko racing set. PM me.
Text only | Text with Images