I only have tool to pull pre 99, where can I find either tool or process for removing pulley hub
Thanks
(https://live.staticflickr.com/65535/49362234817_317c7640ac_z.jpg) (https://flic.kr/p/2icYmE6)ADD6A193-B5BD-45F8-A608-FA751ADD39C3 (https://flic.kr/p/2icYmE6) by D charles (https://www.flickr.com/photos/152723633@N05/), on Flickr
(https://live.staticflickr.com/65535/49361566578_44a7a5f95c.jpg) (https://flic.kr/p/2icUW1J)535ACEFE-FEF7-435A-93A4-8AB91EE0230D (https://flic.kr/p/2icUW1J) by D charles (https://www.flickr.com/photos/152723633@N05/), on Flickr
(https://live.staticflickr.com/65535/49361566603_aab896988c.jpg) (https://flic.kr/p/2icUW2a)0EE71C1A-01FB-43A8-8B42-295C5222A231 (https://flic.kr/p/2icUW2a) by D charles (https://www.flickr.com/photos/152723633@N05/), on Flickr
Don't know about the nut, but I'd use a steering wheel puller.
https://www.summitracing.com/parts/sxt-3900/
Have the tool for the nut, just no way to keep it still
Found the tool in Brittan
(https://live.staticflickr.com/65535/49362661507_7cf33f0df2_z.jpg) (https://flic.kr/p/2id1xuP)55E8B509-C10F-4E88-9F88-5E440C1442B7 (https://flic.kr/p/2id1xuP) by D charles (https://www.flickr.com/photos/152723633@N05/), on Flickr
How does that grab the pulley? ???
I used one of these
http://desmotimes.com/index.html
It's under tools
18 Tooth Cam Wheel Holder Tool - $29.00
Quote from: ducpainter on January 10, 2020, 12:11:55 PM
How does that grab the pulley? ???
The notch in the pulls spindle, there is a threaded access on the belt cover. Anywho, I mounted pulls, put cylinder back together
Tightened belt nd impact gun, lol
Worked just fine
The torque spec on the pulley hub spanner nut is far beyond what that belt cover can stand.
Quote from: Speeddog on January 10, 2020, 03:41:03 PM
The torque spec on the pulley hub spanner nut is far beyond what that belt cover can stand.
Yes, hence the re assembly
The notch is for belt alignment only. But the Brit was calling it a removal tool