Text only | Text with Images

Ducati Monster Forum

Moto Board => Tech => Topic started by: MadJack on May 19, 2020, 03:48:09 PM

Title: 2004 m1000 swingarm options.
Post by: MadJack on May 19, 2020, 03:48:09 PM
Planning out the winter project here,

I'm pretty sure the sss from the s2r1000 will fit but will any from the hypers fit?
Title: Re: 2004 m1000 swingarm options.
Post by: Speeddog on May 19, 2020, 05:50:27 PM
I'm pretty sure the Hypers are SBK style with the bearings in the swingarm.
Based on that, I'd say no, not without a lot of work.

You can check the parts diagrams.
Title: Re: 2004 m1000 swingarm options.
Post by: Duck-Stew on May 19, 2020, 08:09:21 PM
S*R swingarm will fit if you swap the pivot shaft and rearsets.  Only issue beyond that is the exhaust won’t fit and you’ll need a Speedo-Healer type device...

Enjoy the mods!!
Title: Re: 2004 m1000 swingarm options.
Post by: MadJack on May 20, 2020, 01:04:24 AM
Is the dss or sss lighter?
Text only | Text with Images