Print Page - 451.1.025.1A Fixed tensioner assembly

Title: 451.1.025.1A Fixed tensioner assembly
Post by: Bimbo on May 01, 2021, 09:08:40 AM

I hate to jump straight in with a question on my first day, I'm afraid my searching has turned up nowt.

I'm recommissioning the wife's 750M after it has been sat for five years and would like to remove the fixed tensioner / belt guide, but it is not a standard bolt head, just has two flats that are about 10mm and I wondered what people use to remove it. I can get a spanner on but no room to apply any leverage (or swing a hammer [roll] )

Cheers
John

Title: Re: 451.1.025.1A Fixed tensioner assembly
Post by: koko64 on May 09, 2021, 12:44:41 PM

Try HDESA or HDSEA (iirc) for a special tool.
Also Motomfg.com.

Title: Re: 451.1.025.1A Fixed tensioner assembly
Post by: Duck-Stew on May 09, 2021, 08:27:25 PM

I used to use a 10mm crows-foot socket on a 3/8â€ ratchet w/extension. After many removals, the tool was looking a bit haggard.

Ducati Monster Forum

Moto Board => Tech => Topic started by: Bimbo on May 01, 2021, 09:08:40 AM