I have Showa adjustable (well... [roll]) from a -92 SS
on my Monster.
Are the upper legs, anodisized part, the same from a
nonadjustable 750SS -92?
I just need to switch these 2 parts,
the 750 legs to my forks.
Mine are 50/54, 440mm long.
Don't think Showa altered these for so similar forks.
Edit: Bearing pipe same, 41 mm both.
If they're both Showa, the odds are good if the Showa adj and non adj forks look exactly the same in castings. Just with the adj version there was a change in the 90's to the seal holding section on the upper. The anodising is different too, so watch out for that.