Ducati Monster Forum

Moto Board => Tech => Topic started by: beater on July 30, 2008, 01:49:37 PM

Title: 2v's and altitude
Post by: beater on July 30, 2008, 01:49:37 PM
anyone at 3 to 8k above sea level care to share their fcr carb settings?

TIA
Title: Re: 2v's and altitude
Post by: He Man on July 30, 2008, 03:53:20 PM
For a kawasaki zx-6?  [thumbsup]

edit: +1 to speeddog below and more importantly what size FCRs are you running? Do you live in a very humid area? or very dry area? granted i only had stock mikunis but for 0 feet above water, the same settings were too rich when it was humid, and perfect when dry.
Title: Re: 2v's and altitude
Post by: Speeddog on July 30, 2008, 05:54:25 PM
What He Man is trying to say is, for which year and model of Monster?

Any engine mods?
Title: Re: 2v's and altitude
Post by: beater on July 31, 2008, 06:02:54 AM
900ss, 94

hicomp pistons, dyna coils, accel wires, 41mm fcr's,(stock accel pump) open box with k&n. Humidity in Denver floats around 30%, and this is a street application, not a track bike. Temp goes from 65 to 95 daily, so I am just looking for close, and will err on the side of rich for safety on an air/oil bike.

tia

j