I have recently had my bike painted bits are coming back slowly should be complete monday but here are a few pics I have
(http://img98.imageshack.us/img98/1667/tailvn5.jpg)
tail unit to cover single seat
(http://img339.imageshack.us/img339/3334/tankwk4.jpg)
tank will post better pictures when its complete
(http://img98.imageshack.us/img98/2357/wheel2tf4.jpg)
(http://img509.imageshack.us/img509/365/wheelsol5.jpg)
changed colour of wheels added pinstripe
Hell yeah. [thumbsup] [clap] Nice.
OMG TRIBAL. Do you have a flux capacitor? are we back in 1999? ;D
You know what helmet that would go with. the RF-1000 with the tribal designs. lol looks nice though. Did you do it yourself? these are airbrush graphics right? not vinyl?
That looks awesome. I want to get mine custom painted. With a rabid daffy duck/ godzilla sorta theme.
I dig it. [thumbsup]
I'm not sure about the side of the tank though, maybe a bit overkill. :-\
Also, how about some gold to tie in the theme with the wheels?
The bike is all air brushed, I wish it was me who painted this but sorry no the person who painted the bike is booty from rage designs in the uk he paints all the bsb airwave ducatis and does troy bayliss wsb bikes for xerox i will post more pics the tank pic does it no favours its awesome the badges on the tank are gold the flash caught it wrong will get some more pics
the designs was taken from this years arai ducati druid helmet it cost reigon of £2,000.00 for painting
some of the mods i have purchased some waiting to be put on the bike
paint scheme
replaced forks for ohlins
replaced rear shock for ohlins
sato rearsets
seat unit from france single seat
pazzo levers
gold silicone hoses
rizoma belt cover,mirrors, resevoirs, grips, crash bungs, indicators(front)
zard full system
power commander
velocity stacks for v 4
dp airfilter & modded box
headlight conversion (twin)
steering damper
tail cut off (tidy the back end)
led back light (indicators part of rear light)
I think there is more but i will picture all the mods over the next week
will also be having the bike rolling road back end of next week so will be able to give a bhp reading
Is this a new trend - noobs starting on DMF with their bikes already heavily modded?
Great work so far - keep feeding us pictures, please [thumbsup]
Quote from: stopintime on August 16, 2008, 03:22:32 AM
Is this a new trend - noobs starting on DMF with their bikes already heavily modded?
Great work so far - keep feeding us pictures, please [thumbsup]
when i joined the forum my bike was totally standard most of the ideas came from this forum
(http://img292.imageshack.us/img292/9128/firststartedbikerv7.jpg)
I like the color of the rims! and with the stripes?really nice [thumbsup]
(http://img153.imageshack.us/img153/3919/tailunitcowlrd8.jpg)
cowl tail unit
(http://img84.imageshack.us/img84/3451/fenderli1.jpg)
fender
(http://img210.imageshack.us/img210/4206/bikeky6.jpg)
My Bike
I am going today to my local ducati dealership were the bike is awaiting for my mods i will take some better pictuers and post them
Awesome, very well planned and executed [thumbsup]
Nice [thumbsup] I love something different.
Lou
Nice job! I love the rear cowl and the wheels! The tank at first was too much for me but the picture of it on the bike makes it look much better.
[thumbsup]
I likey very much [thumbsup]
Niiiice [thumbsup] [thumbsup], yep that two thumbs up, with those funny little smilie thingies. - Chris
(http://img155.imageshack.us/img155/1439/clutchplatelb7.jpg)
Clutch plate from italy stainless springs red caps
(http://img293.imageshack.us/img293/4716/openclutchcovervd4.jpg)
Open spider clutch cover
(http://img183.imageshack.us/img183/9938/tailchopoffsq9.jpg)
Modded tail chop
(http://img291.imageshack.us/img291/2558/radcoverai9.jpg)
Friend lost a rad so bought wired guard
(http://img135.imageshack.us/img135/4396/ohlinsshockadjusterae3.jpg)
Ohlins shock adjuster
(http://img172.imageshack.us/img172/3268/satorearsetswm2.jpg)
Did not know which rear sets to go for but in the end settled for sato
(http://img183.imageshack.us/img183/886/zardta3.jpg)
The build and sound on these imo are the best termi no where near, have a power commander on as well new out 2007 tet engine (same as s4rs)
Very nice [thumbsup] [thumbsup]
Looking like quite a project. [thumbsup]
Are you running the Zards with the stock ECU and a power commander?
If so, how does she run?
I like what you have done with the paint job, very different and original. If you havent already done them get rid of the stock mirrors and go Rizoma bar ends or something similar couples with billet grips.
Post some more pictures please.
I like the Zards as well but the Termis on my S4R arent too bad.
Bret
I am runing the bike with standard ecu with the power commander tpo have just released veloicty stacks for 4 valve so i have purchased them
they recommend dp modded box k&n filter for the besr results
I have gone for these grips
(http://img223.imageshack.us/img223/7543/rizomagripszg3.gif)
With these mirrors
(http://img223.imageshack.us/img223/3491/rizomamirrorsev6.jpg)
Ohlins forks with pazzo levers (shorties)
(http://img244.imageshack.us/img244/1628/forkssa9.jpg)
I am away for 5 days my bike will be getting a dyno set up on thursday so i will post the pics of this and hopefuly
the bike will be ready for me ride with all my mods
[drink] [clap]
[moto] [moto] [moto]
I will post more images when I get back
Woooooooody.
Well had the bike on the dyno
Had the zards fitted, dp modded airbox and K&N filter with pc3
(http://img254.imageshack.us/img254/8291/ondynofz5.jpg)
when he did the first run with the pc3 not connected it was running really lean, He did one run.
the final run was placed over the first run 122.2 bhp rear wheel
(http://img528.imageshack.us/img528/2359/beforeaftergc0.jpg)
Then he run power over torque
(http://img165.imageshack.us/img165/1368/torquerungi7.jpg)
A final run brought up 133.7 bhp at the rear wheel not bad for exhaust, modded airbox, filter
(http://img165.imageshack.us/img165/9788/1337bhprunst4.jpg)
I have the new tpo 4 valve stacks fitted which brought the power down to 129.0 bhp rear wheel so took them off
Hey vecrtra that is really helpful, thank you.
Just confirming: you are still using the stock ECU with O2 sensor plugged into exhaust, yes? And the new PCIII for this bike? (Looks like the right part No. on the dyno sheet.)
OR is the O2 sensor unplugged?
Bike looks great in those pics. Congrats. [clap]
Quote from: Moronic on August 28, 2008, 08:21:14 PM
Hey vecrtra that is really helpful, thank you.
Just confirming: you are still using the stock ECU with O2 sensor plugged into exhaust, yes? And the new PCIII for this bike? (Looks like the right part No. on the dyno sheet.)
OR is the O2 sensor unplugged?
Bike looks great in those pics. Congrats. [clap]
stock ecu 02 sensor unplugged and yes new PCIII
Thank you
Ah, sensor unplugged. Drat.
Tho it does seem to work fine!
Enjoy.
right on! I like to see new 'exotic' paint jobs like this. good stuff!
Bike looks great
Well done [thumbsup] I like the looks of that dyno.
I didnt see any Pics with the Rear cowl on. Do U have some ?
Not been on for a while bike is having some little tweaks here and there then one of my friends is going to do a photo shoot with the bike (he is good with a camera) then i will be able to show you the full spec of the bike with hopefully some cool pics [thumbsup]
[beer]
You HAVE to take it to the UKMOC weekender at Arrow Mill in May.