OEM footpegs

[Twizted]

I just removed my stock rear sets as I am gonna get them sand blasted next week so I can repaint as they were pitted and flaking. Just wanted to know if anything can be done to clean up the foot pegs. I considered buying aftermarket pegs but all of them seem to be just for the front pegs. There doesn't seem to be an extra hole for the ball bearings and spring that the rear need to stay up.

Also  I considered painting them as well but don't want to do it if the paint is just going  to wear off in a few km's.
Is there some product I can use on them to make them shinier? BTW they are on a Monster 1000ie.

[braando]

Mate........do you mean you want a complete set......as in passenger pegs as well....?
If so.....Rizoma make passenger pegs......

[FIFO]

Hey Twisty

The OME foot pegs are interchangeable front to rear.
I cleaned mine up with with chemtec Blitz aluminum cleaner and wire brush http://www.chemtech.net.au/wn_chemtech1l.html
Bloody Brian is going to get all the secrets and be so envious of those pictures
Then sprayed them with clear lacquer.

I also nickle plated all the foot peg pins and mounting bolts for the rear sets.

If you have it in pieces send hardware of for chroming looks good.

http://www.ducatimonsterforum.org/index.php?topic=30599.45

[braando]

That is a lovely strip of imitation carbon there Robby........

[monstermick58]

That is a lovely strip of imitation carbon there Robby........

He'll have you know that that's genuine imitation carbon fibre, nothing but the best for our mate Rob, eh Rob?










                                    Mmick

[Two dogs]

That is a lovely strip of imitation carbon there Robby........

Oh so predictable Teff 
And how are all those lovely textured PLASTIC panels going on the MV 
How about you hurry up and sell that HD so you can fund some much
needed $$$ improvements to that Italian rice burner.
Or should we call it the

" RISOTTO ROCKET"

[FIFO]

That is a lovely strip of imitation carbon there Robby........

Yer i know Brian Teff stops my size twelves from rubbing the paint off.
Unless you got a better idea, and not new billet rear sets.

[braando]

No no no......its fine........after a second look i see the carbon pattern matches the RUBBER footpegs.......!

[Twizted]

DONE! 



I used paint stripper to get rid of the old peeling flaking paint. Sanded all the oxidization off. Wiped with prepsol. Used a metal etch primer then painted with wheel paint in a satin black. Looks much better.
Also found out my rear brake switch was rooted so I had to replace it.

[FIFO]

Looking good i like the black rearsets with black frame 

[heatherp]

Yes they do look good in black.