News:

This Forum is not for sale

 

Duc seats

Started by Roscoe, January 08, 2009, 06:45:07 PM

Previous topic - Next topic

angler

Quote from: Darth Paul on February 10, 2009, 08:21:16 AM
I have a Sargent for sale, wanna trade? :)

You serious? I would definitely consider it.  I'll PM you.
996 forks, BoomTubes, frame sliders, CRG bar-end mirrors, vizitech integrated tail light, rizoma front turn signals, rizoma grips, cycle cat multistrada clip ons, pantah belt covers - more to come

The whole aim of practical politics is to keep the populace alarmed (and hence clamorous to be led to safety) by menacing it with an endless series of hobgoblins, all of them imaginary. H. L. Mencken

angler

Slight threadjack - how is it for a passenger on the Sargent seat?  It looks like it might be a bit less secure..... I don't carry passengers that often, but when I do, I don't want them sliding off.
996 forks, BoomTubes, frame sliders, CRG bar-end mirrors, vizitech integrated tail light, rizoma front turn signals, rizoma grips, cycle cat multistrada clip ons, pantah belt covers - more to come

The whole aim of practical politics is to keep the populace alarmed (and hence clamorous to be led to safety) by menacing it with an endless series of hobgoblins, all of them imaginary. H. L. Mencken

Sleeper_I

Quote from: mrplease on February 10, 2009, 05:53:56 AM
can you please take a pic with the seat cover on?

thanks!!!


I'll take a pic when the weather clears up a bit


Sleeper_I


mrplease

AWSOME! i really appreciate the pics! looks great...

its on my list of future mods!

Norm

narrower, harder, and shaped so you naturally rest just short of the tank.

geoffduc

Quote from: Mash on February 10, 2009, 08:25:49 AM
My s2r1k seat cowl fits over the sargent seat.  It's a little more snug than the OEM seat, but not so much it would cause damage.

I've had the same sargent seat on my last three monsters and have not had any problem with the fitment of the cowl,plus i find it alot more comfortable than the stock seat  [clap]

[coffee]
2015 scrambler FT
2009 monster 1100s

slowpoke13

Quote from: Smokescreen on January 09, 2009, 09:04:43 AM
who would buy a solo seat with a locking storage compartment built into the back, and it wasn't worth doing a one off to gauge customer feedback...

When I was down in OZ, one of the locals showed me his seat. It's made in France for the Monster. Limited quantities. A bit on the pricey side. Made by hand.

http://www.saddle-box.net/

I've got one on order (don't need it till Summer anyway). There's an acre of storage under the seat.

Thankfully, the virgins take good care of the fragile stuff.
slowpokesan

Mojo S2R

Quote from: slowpoke13 on February 14, 2009, 03:38:11 AM
When I was down in OZ, one of the locals showed me his seat. It's made in France for the Monster. Limited quantities. A bit on the pricey side. Made by hand.

http://www.saddle-box.net/

I've got one on order (don't need it till Summer anyway). There's an acre of storage under the seat.

Thankfully, the virgins take good care of the fragile stuff.

Post some pix and review when you get it.  [popcorn]

cloud2blue

Big T has one on his.

http://www.ducatimonsterforum.org/index.php?topic=4422.0

Would be very cool if they were not so fracking expensive.

BaZgA

It would be nice if you could compare it with DP performance seat

Quote from: Sleeper_I on January 10, 2009, 07:12:32 PM
This is the DP lower seat, not the touring seat, for the 696/1100:



Pros:
20mm lower (as advertise for short Ducatistis)
Less, much less, of a forward angle compare to stock (Happy manhood [thumbsup])
Smooth alcantara (I think) material for rider's buns (The guys at the dealer agreed the feel is much better than the DP touring material)
Semi rough (read non-slippery) but cushy composite material for passenger's buns
Better cushions compare to stock (even though there are less material)
Red stitching is nice
Fits the rear cowl nicely and looks better than stock

Con:
the width is the same with less material underneath making it more flatter than stock. This translate to a more of a bowed leg feel with both feet down and result in not much of a gain in the feet to ground contact over the stock height. I say more of a 10mm advantage and not 20mm advantage over stock.

But still very happy with the purchase. Worth it [moto] 

Sleeper_I

Quote from: BaZgA on March 06, 2009, 01:17:42 AM
It would be nice if you could compare it with DP performance seat

Are you refering to the touring seat? If so, unfortunately, I don't have one to compare it to. But I do remember seating on one at the dealer. One noticable different is the touring seat have the same concave shape at the groin cussion as the stock seat where as the lower seat have more of a flat area between the groin. For me, the flatter shape puts less pressure underneath my manhood and more on my buns. Another is the lower seat have an alcantara type skin for the rider compare to the rough texture the touring seat have. But I have not had a chance to take one with the touring seat out for a long ride to compare.

Monstermash

Quote from: geoffduc on February 14, 2009, 02:54:50 AM
I've had the same sargent seat on my last three monsters and have not had any problem with the fitment of the cowl,plus i find it alot more comfortable than the stock seat  [clap]

[coffee]

+1 on the Sargent. I've had them on both of my Monsters, my 999, my 749, and my old R1. Nothing better IMO.
I've been wallowing in my own chaotic and insecure delusions.



"Though I disagree with everything you say, I will defend to the death your right to say it."

BaZgA

Quote from: Sleeper_I on March 06, 2009, 05:20:35 PM
Are you refering to the touring seat? If so, unfortunately, I don't have one to compare it to.

Yes I was refering to it.
It would be great to see that comparison