News:

Welcome to the DMF

 

Why is my bike difficult to start?

Started by DucHead, October 19, 2008, 09:28:01 AM

Previous topic - Next topic

Drunken Monkey

I had a starting problem with my bike, and I checked everything (sync, FI, Sensors, etc.) and still couldn't nail down the problem.

Turned out the ignition pickup sensor wasn't gapped right...
I own several motorcycles. I have owned lots of motorcycles. And have bolted and/or modified lots of crap to said motorcycles...

DucHead

One thing I failed to mention is that I fixed (Rameses did some welding) some exhaust leaks, and afterward the idle was low (800 rpm).  I used the throttle adjust bolt and upped the idle a bit and its started easily ever since.

Could that have been the problem (low idle)?
'05 S4R (>47k mi); '04 Bandit 1200 (>92k mi; sold); '02 Bandit 1200 (>11k mi); '97 Bandit 1200 (2k mi); '13 FJR1300 (1k mi); IBA #28454 "45"

ducpainter

I guess it could...

The cold start lever should compensate for that.

I believe that adjusting the throttle stop will put your tps out of adjustment to a degree.

It may not matter.
"Once you accept that a child on the autistic spectrum experiences the world in
a completely different way than you, you will be open to understand how that
 perspective
    is even more amazing than yours."
    To realize the value of nine  months:
    Ask a mother who gave birth to a stillborn.
"Don't piss off old people The older we get, the less 'Life in Prison' is a deterrent.”



DucHead

#18
Update:  A few days ago, I set the throttle position bolt back to its original setting and then turned the air bleed screws out 1/8th of a turn.  Idle speed increased and starting is better.  Plugs are a light tan.

It even started this morning on the second try and the outside temperature was 24°F!  It hasn't done that in a year or two!!  [moto]
'05 S4R (>47k mi); '04 Bandit 1200 (>92k mi; sold); '02 Bandit 1200 (>11k mi); '97 Bandit 1200 (2k mi); '13 FJR1300 (1k mi); IBA #28454 "45"