Mirror mount with radial masters?

[stopintime]

if you look at those clamps, the bolt pattern is not offset.  That won't work with the radial pump master the OP was referring to.

Unless I go for the RCS type  No, I have to draw the line somewhere - those RCSs are nice, but overkill for my budget and needs.

I'm waiting for responses from a few good vendors, who are trying to help I'll post what I find out. Not a huge issue though - I'll probably do fine with the slightly larger (16mm) coffin master if I must settle for that.

[BumbleB]

These might come up a little higher at the bar-ends...I am looking at them as an option...Rizomas

[Drunken Monkey]

Same issue on my bike.

I looked high, I looked low, and I have been unable to find anything other than one company in Italy that makes them.

I can dig up the link if you'd like, but they were about $120 a pop 

[Drunken Monkey]

http://ducatimonsterforum.org/index.php?topic=15770.0

Moto Corse. Never got through to the US distributor and they are some serious $$$

[Raux]

 the M1100 are radial masters. they have a conventional mirror.