News:

This Forum is not for sale

 

1980 Ducati Darmah - I Bought It!

Started by Travman, January 12, 2012, 04:23:10 PM

Previous topic - Next topic

Bishamon

2011 Monster 796
2007 Sport 1000 SE (SOLD) :(

yamifixer

'00 M900Sie, '66 Benelli Fireball, '70 Honda Z50
Valve Springs are EVIL

fastwin

Makes me wish my '82 Hailwood Rep ran. It needs to go to someone who will spend the coin to make her right.
I plan to list the Federal Gov't. as a dependent on my next 1040 tax filing!

I have flying honey badgers and I'm not afraid to use them!

The fact that flame throwers exist is proof that someone somewhere said "I'd sure like to set those people over there on fire but I'm just not close enough to get the job done."

CONFIDENCE: the feeling you have right before you understand the situation.

LA

Well congratulations!

I haven't seen this thread in a while, but I did see where someone said they handle like battle ships or something.  It's not a sissy's bike.  You can make one that is well prepared handle quite well, but it takes a certain amount of "commitment" from a competent pilot.  They will go where you point them, but it does take some forethought.

Hell, it's worth a lot ($) as pure art.  And it IS Italian art - I bet Leonardo di ser Piero da Vinci would approve. Hang in on the wall if you can't keep it running.

LA  [thumbsup]
"I'm leaving this one totally stock" - Full Termi kit, Ohlins damper, Pazzo levers, lane splitters, 520 quick change 14/43 gears, DP gold press plate w/open cover, Ductile iron rotors w/cp211 pads.

R90S (hot rod), 80-900SS, Norton 850 MkIII, S4RS

garryc

Lots of great bevel info at
Bevelheaven.com
aussie flavour beveldom at "bevelducati.proboards.com"

The motto of QLD AUS bevel and Bullshit Rally
"The bevel made me do it"

Travman

Quote from: Curmudgeon on March 14, 2012, 06:19:05 PM
Nice!  [thumbsup] You need a knee down to turn it though, right?  ;) Does it have 40's or 36's? K&N's? Whatever..., I'm sure Donnie has it running just great!
The carbs are 32's with conical K&N's and the mufflers are Contis.  The smaller carbs gave the SD a lot of low-end punch, not as much top end.  If I was to change to the larger 40mm Dell Ortos it would also probably need the larger intakes too.  I'm going to leave it the way it is for now.  It is a very civilized and pleasant motorcycle compared to some other vintage bikes I've ridden.  The seat is nice too.  I rode three hours yesterday with no breaks and no complaints.  It is probably 100 lbs heavier than lighter bikes like my Monster or even a Norton Commando.  It has a wheelbase of 61 inches and I think the steering head rake is something like 31 degrees so it is not a sport bike.  So it does take a little more effort to turn than a sport bike, but any comparisons to steering like a battleship are greatly exagerated. It is nice and stable when leaned over and ridden at 7/10ths on backroads it feels great. 

Oh and the stiff clutch is not even a slight issue.  It really isn't that stiff after all.  I never notice it.  Side stand is easy for me too.  I won't need to find a kickstand after all.   

Thanks for the congratulations from everybody. 

ducatiz

Quote from: Travman on March 16, 2012, 10:34:10 AM
Thanks for the congratulations from everybody. 

scru u and the kangaroo you hopped in on
Check out my oil filter forensics thread!                     Offended? Click here
"Yelling out of cars, turning your speakers out the window to blast your music onto the street, setting off M-80 firecrackers, firing automatic weapons into the airâ€"these are all well and good. But none of them create a merry atmosphere of insouciance and bonhomie quite like a revving motorcycle.

Travman

Quote from: ducatiz on March 16, 2012, 10:35:42 AM
scru u and the kangaroo you hopped in on
Keep it up and you won't get invited into my new Ducati Darmah owners club.   [Dolph]

Curmudgeon

Thanks. Sounds good! If it's running well with the 32's and conical K&N's, it's been jetted accordingly if it's nice and crisp. Those conicals flow, so I'd agree, you'd likely need larger valves to make good use of 40's. Enjoy the character of the Darmah as is then. Had a 900 SS, so never rode a Darmah myself. My 600 SL steered like a bicycle compared to my SS.  ;)

As for steering, the wheelbase is pretty long too to match the head angle. With an SS it could be a struggle to change direction and you had to think ahead. The euro bar on this bike probably gives you a lot more leverage than the clip-ons on the SS. Tires today are also possibly greatly improved. Sport Demons on yours?
2011 796 ABS "Pantah" - Rizoma Bar, 14T, Tech Spec, Ohlins DU-737, Evaps removed, Sargent Seat, Pantah skins

ducatiz

Quote from: Travman on March 16, 2012, 11:06:50 AM
Keep it up and you won't get invited into my new Ducati Darmah owners club.   [Dolph]

i'm just jealous.

mine isn't running.. bad coil.  no time.
Check out my oil filter forensics thread!                     Offended? Click here
"Yelling out of cars, turning your speakers out the window to blast your music onto the street, setting off M-80 firecrackers, firing automatic weapons into the airâ€"these are all well and good. But none of them create a merry atmosphere of insouciance and bonhomie quite like a revving motorcycle.