749/999 wheels on s4

[ducatibokes4]

Mods,if this post os in the wrong section then I'm sorry.

My question is would 749/999 wheels fit on a s4.
Does anything need be be changed to fit them mad so on.

Thanks for the info 

[ducpainter]

Not a bolt on.

Rotors are different bolt pattern and offset.

People have done it.

I'm going to move this to Acc&Mods.

[ducatibokes4]

So if I got an set with rotors them the offset could be correct for the calipers?
Or do I need to space them?

[ducpainter]

So if I got an set with rotors them the offset could be correct for the calipers?
Or do I need to space them?

You'd need to space them unless you used 749/999 forks and calipers.

[Speeddog]

Rear axle is larger, and rear rotor is smaller diameter.

749 rear caliper hanger is a bit different, perhaps could be made to work.

Overall wheel width may be different.

[caperix]

A few sport classic owners have installed them.  I know the front end of those is similar to the S2R800.  On the back They used the caliper bracket from the 749/999 & made custom spacers.  I think it would need a speedo healer because of different number of bolts on the rear rotor.

[Duck-Stew]

A few sport classic owners have installed them.  I know the front end of those is similar to the S2R800.  On the back They used the caliper bracket from the 749/999 & made custom spacers.  I think it would need a speedo healer because of different number of bolts on the rear rotor.

Or, you could just always know that you're doing 6/5ths the speed indicated... 

S4 has 25mm rear axle, 749/999 has a 30mm rear axle FWIW.