BDST-38 mods as per ducatigirl100

[scaudill]

KOKO,
Were you able to do any research on relocating the jets in the Mikuni carbs? (as per ducatigirl100) I need to rejet/adjust needle for the vertical cylinder.  I have the airbox off now and thought I would check with you before everything goes back together.
Just curious, sound like a great modification.
Sterling

[NAKID]

You should probably PM him...

[ducatigirl100]

I'll take the carb appart tomorow...  i'll take a few photo's and check what size hare the jets  .

I'm overhaling the bike so I add the intention to clean the carb up anyway  

Here's the current status of the bike ...

[ducatigirl100]

Here's what I have currently in it

[ducatigirl100]

Warning !

If you try this mod assure yourself to note all your original settings...

Originaly I add a 132 secondary main whit a 140 main jet but I was using the original needle.   Now I use a more profile needle whit the Y-2 Needle jet.

I'm trying to see what is the size of the needle but I'm not able to see it ....it came whit a dynojet kit that I bougt from monsterparts a couples years ago

You will have the set the idle screw  first  and adjust the hight of the notch on the needle to adjust the mix. I take a little bit of trial an error to adjust it.  If you never took a carborator appart; I would not suggest doing this mod