News:

Welcome to the DMF

 

What can I make out of 3/8 Titanium plate?

Started by Monsterlover, April 13, 2017, 07:42:44 AM

Previous topic - Next topic
Print
Go Down Pages 1 2 3 4 5
User actions

Speedbag

#15
April 13, 2017, 10:39:17 AM
Quote from: kopfjäger on April 13, 2017, 08:47:07 AM
Certainly not bottle openers.

What ever happened to those?  ???
I tend to regard most of humanity as little more than walking talking dilated sphincters. - Rat

ducpainter

#16
April 13, 2017, 11:11:32 AM
Quote from: Speedbag on April 13, 2017, 10:39:17 AM
What ever happened to those?  ???
We never hit the 50 orders he needed.
"Once you accept that a child on the autistic spectrum experiences the world in
a completely different way than you, you will be open to understand how that
 perspective
    is even more amazing than yours."
    To realize the value of nine  months:
    Ask a mother who gave birth to a stillborn.
"Don't piss off old people The older we get, the less 'Life in Prison' is a deterrent.”


The Architect

#17
April 13, 2017, 11:32:13 AM
Quote from: ducpainter on April 13, 2017, 09:22:05 AM
You have mine. ;D

I'll send you my address also.  I recall I have a pizza due to me.  I'll take a bottle opener in lieu. 

triangleforge

#18
April 13, 2017, 11:53:21 AM
A friend with a water jet cutter at work made a bunch of these & gave me one, in (approximately) 3/8" stainless:

2017-04-13_11-24-10 by triangleforge, on Flickr

Ti would be cooler...

I like the rearsets idea, but you know better than I do what the capabilities of the material are.

A small titanium pry bar like this would be handy:



Especially if you sold it with an incredibly over-wrought description like this: http://www.cogentindustries.com/products/prymal/
By hammer and hand all arts do stand.
2000 Cagiva Gran Canyon

triangleforge

#19
April 13, 2017, 11:59:31 AM Last Edit: April 13, 2017, 12:01:51 PM by triangleforge
Are you able to do any bending operations on it, or will it just be cutting/stock removal?
By hammer and hand all arts do stand.
2000 Cagiva Gran Canyon

Monsterlover

#20
April 13, 2017, 12:10:50 PM
Quote from: triangleforge on April 13, 2017, 11:59:31 AM
Are you able to do any bending operations on it, or will it just be cutting/stock removal?

If something gets bent here we shit can it ;)

Quote from: triangleforge on April 13, 2017, 11:53:21 AM
A friend with a water jet cutter at work made a bunch of these & gave me one, in (approximately) 3/8" stainless:

2017-04-13_11-24-10 by triangleforge, on Flickr

Ti would be cooler...

I like the rearsets idea, but you know better than I do what the capabilities of the material are.

A small titanium pry bar like this would be handy:



Especially if you sold it with an incredibly over-wrought description like this: http://www.cogentindustries.com/products/prymal/

Re the pry bar... But wait, there's more!
"The Vincent was like a bullet that went straight; the Ducati is like the magic bullet in Dallas that went sideways and hit JFK and the Governor of Texas at the same time."--HST    **"A man who works with his hands is a laborer.  A man who works with his hands and his brain is a craftsman.  A man who works with his hands, brains, and heart is an artist."  -Louis Nizer**

Grampa

#21
April 13, 2017, 12:22:16 PM
a knee
Gaspar, Melchior and Balthasar kicked me out of the band..... they said I didnt fit the image they were trying to project. 

So I went solo.  -Me

Some people call 911..... some people are 911
-Marcus Luttrell

Monsterlover

#22
April 13, 2017, 12:40:49 PM
Quote from: Grampa on April 13, 2017, 12:22:16 PM
a knee

Just a knee?  Not a whole skeleton?
"The Vincent was like a bullet that went straight; the Ducati is like the magic bullet in Dallas that went sideways and hit JFK and the Governor of Texas at the same time."--HST    **"A man who works with his hands is a laborer.  A man who works with his hands and his brain is a craftsman.  A man who works with his hands, brains, and heart is an artist."  -Louis Nizer**

Speeddog

#23
April 13, 2017, 12:43:03 PM
Quote from: Monsterlover on April 13, 2017, 12:10:50 PM
Re the pry bar... But wait, there's more!

Buy one, and for a *nominal* shipping and handling charge, we'll throw in a second one FREE!
- - - - - Valley Desmo Service - - - - -
Reseda, CA
(951) 640-8908

~~~ "We've rearranged the deck chairs, refilled the champagne glasses, and the band sounds great. This is fine." - Alberto Puig ~~~

Monsterlover

#24
April 13, 2017, 12:51:04 PM
Quote from: Speeddog on April 13, 2017, 12:43:03 PM
Buy one, and for a *nominal* shipping and handling charge, we'll throw in a second one FREE!

[laugh]
"The Vincent was like a bullet that went straight; the Ducati is like the magic bullet in Dallas that went sideways and hit JFK and the Governor of Texas at the same time."--HST    **"A man who works with his hands is a laborer.  A man who works with his hands and his brain is a craftsman.  A man who works with his hands, brains, and heart is an artist."  -Louis Nizer**

Popeye the Sailor

#25
April 13, 2017, 01:07:18 PM
Please to make a new and improved Toasty.

If the state had not cut funding for the mental institutions, this project could never have happened.

DesmoDiva

#26
April 13, 2017, 01:17:26 PM
'01 ST4 Yellow
'02 ST4s Yellow

ZLTFUL

#27
April 13, 2017, 02:12:35 PM
Wait...someone's making bottle openers? Count me in!











































;D ;D ;D
Avatar courtesy of www.mybadco.com
2012 Panigale 1199
2003 KTM 640 Adventure

triangleforge

#28
April 25, 2017, 08:59:33 PM
So what did you come up with?
By hammer and hand all arts do stand.
2000 Cagiva Gran Canyon

Monsterlover

#29
April 26, 2017, 02:16:02 AM
Nada. I haven't had time to think about it.

Kind of par for the course these days. ;)
"The Vincent was like a bullet that went straight; the Ducati is like the magic bullet in Dallas that went sideways and hit JFK and the Governor of Texas at the same time."--HST    **"A man who works with his hands is a laborer.  A man who works with his hands and his brain is a craftsman.  A man who works with his hands, brains, and heart is an artist."  -Louis Nizer**
Print
Go Up Pages 1 2 3 4 5
User actions