Gents,
So today was 'make sweet love and talk dirty' to my new 696 (also known as waxing). So here's some shots of the tank covers and seat off. I didn't want to wax it with the covers on in fear of getting wax on the flat-finished bits.
(https://lh5.ggpht.com/Shusaim/SDhSrk6SSsI/AAAAAAAABLs/50w9Q4QbFNo/s800/696_naked_5.jpg)
(http://lh4.ggpht.com/Shusaim/SDhS2U6SSvI/AAAAAAAABME/hSc3vQAklwk/s800/696_naked_2.jpg)
(https://lh5.ggpht.com/Shusaim/SDhSzk6SSuI/AAAAAAAABL8/hMgfg9SosKQ/s800/696_naked_3.jpg)
(http://lh6.ggpht.com/Shusaim/SDhSx06SStI/AAAAAAAABL0/EXpXG8s1lgI/s800/696_naked_4.jpg)
(http://lh3.ggpht.com/Shusaim/SDhS4E6SSwI/AAAAAAAABMM/PqDrZmov65A/s800/696_tank_covers_1.jpg)
(http://lh6.ggpht.com/Shusaim/SDhS506SSxI/AAAAAAAABNM/qRfh8OVsGwM/s800/696_tank_covers_2.jpg)
Also - I noticed a slight oil weep coming from the vertical cylinder timing cover...We'll see what the dealer has to say; I guess the O-ring isn't seated properly.
(http://lh4.ggpht.com/Shusaim/SDhS9U6SSzI/AAAAAAAABMk/OaN42ewQchk/s800/696_oil_weepage_timing_cover.jpg)
-Steve
Actually looks cool with the tank bits off there!!
Just put the seat back on and ride like that!! [thumbsup]
No barends yet and you STILL have the reflectors on there?!
WTF DUDE?! >:(
[cheeky]
Look at the below -- it appears your barclamp is doing some sort of levitating act...
Quote from: SteveH on May 24, 2008, 10:56:19 AM
(https://lh5.ggpht.com/Shusaim/SDhSzk6SSuI/AAAAAAAABL8/hMgfg9SosKQ/s800/696_naked_3.jpg)
Ya those metal things are just shrouds. There's a bolt with a rubber dampner behind 'em that actually hold everything together.
How easy is it to take off the tank and what not? and how easy do you think it would be to custom paint those bits?
Quote from: Dareduc on May 24, 2008, 11:46:11 AM
How easy is it to take off the tank and what not? and how easy do you think it would be to custom paint those bits?
Its pretty easy - 10mins maybe ? There are about 12 bolts that you need to remove, then the panels just slide off. Im sure getting 'em painted would be a breeze - they seem to be of good quality and thickness. I was shocked at how flimsy...err....'Weight Reduced' the front fender was though...Its honestly damn near soda bottle plastic. But it is unsprung weight eh [laugh]
You could send it out for custom paint and still ride it! How cool is that?
This Monster is really growing on me.
I would need to figure out the seat issue though. It was very uncomfortable for me :-\
Anyone try Ducati's after market seat yet ?
That is a very interesting tank/airbox setup. They did a good job of hiding the whole setup, I am very surprised they are not sellign a painted tank tho!
Does the tank go under the seat as well?
No Disrespect you man. But my personal doesnt doesnt appeal to the 696. Well, at least not yet. We shall see what the aftermarket world does for the bike. I think I am still a 4V guy at heart.
Heath
Quote from: ROBsS4R on May 24, 2008, 05:59:08 PM
This Monster is really growing on me.
I would need to figure out the seat issue though. It was very uncomfortable for me :-\
Anyone try Ducati's after market seat yet ?
I sat on it today, seemed a bit softer than stock.
Didn't take it for a ride so I can't make any sort of educated comment.
had too much [wine] ignore the babble.
The more I look at the 696, the more I like it.
Yes. I know. I'm a philistine.
QuoteI sat on it today, seemed a bit softer than stock.
Didn't take it for a ride so I can't make any sort of educated comment.
My issue was the angle of the seat. It felt like it was pushing me into the tank.
Quote from: ROBsS4R on May 24, 2008, 08:56:05 PM
My issue was the angle of the seat. It felt like it was pushing me into the tank.
It's just your massive man junk AKA "munk" that's causing the issue. After a few hard stops you'll probably dent the tank, then you'll be fine.
Is the fuel cell hinged like other Monsters? Is it a lot of work now to get to the battery? Just wondering.
Thanks for posting those pics. I was very curious to see what it looked like under there...nice bike! [thumbsup]
Guys,
Ya Im kinda feeling the same way about the seat - I was thinking maybe I just needed to get used to it ? I find myself scooting up towards the rear of the pad to stop from being wedged next to the tank....
The tank does go below the seat slightly - not sure how much of a PIA it will be to change the battery - perhaps just need to remove the tool tray ? Not really sure....Guess I shoulda looked though [bang]
Quote from: fasterblkduc on May 25, 2008, 05:08:25 AM
Thanks for posting those pics. I was very curious to see what it looked like under there...nice bike! [thumbsup]
+1
I think the functional vents through the tank are pretty cool.
Quote from: monsterduc on May 25, 2008, 07:40:09 AM
+1
I think the functional vents through the tank are pretty cool.
with all the old anticipation posts, it does serve some purpose. but is it airbox or vert cyl cooling?
Quote from: printman on May 25, 2008, 08:22:15 AM
with all the old anticipation posts, it does serve some purpose. but is it airbox or vert cyl cooling?
that's the airbox. they changed the shape of it so it comes up throug the frame.
if you look at the gas tank, it hinges near the middle of the saddle -- the tank extends 5-6 inches under the saddle.
very different design.
Quote from: ducatizzzz on May 25, 2008, 09:31:01 AM
if you look at the gas tank, it hinges near the middle of the saddle -- the tank extends 5-6 inches under the saddle.
very different design.
Thanks for pointing that out...I see it now. Does anyone know if it still lifts out of the way easily?
Quote from: someguy on May 24, 2008, 10:13:08 PM
It's just your massive man junk AKA "munk" that's causing the issue. After a few hard stops you'll probably dent the tank, then you'll be fine.
You two should get a room. [cheeky] [laugh]
Quote from: fasterblkduc on May 25, 2008, 09:42:53 AM
Thanks for pointing that out...I see it now. Does anyone know if it still lifts out of the way easily?
it does, you just have to take the seat off first. the battery and intakes aer still directly under the tank.
The "oil weep" is probably just packing grease that didn't get cleaned off completely after uncrating. Clean it off and don't worry, it's not worth pregnant doging at the dealer about.
QuoteYou two should get a room. cheeky laughingdp
Maybe we have already ??? How else would he know about all that massive Man Junk... Munk ;D
Let the modding begin [thumbsup]
Nice bike.. would I be too crazy if I traded my 05 S4R for the 696? [roll]
QuoteNice bike.. would I be too crazy if I traded my 05 S4R for the 696?
Nope. Test Ride the 696 and get what you like.
My next monster will prob be a smaller one.
Quote from: ROBsS4R on May 26, 2008, 02:45:20 PM
Nope. Test Ride the 696 and get what you like.
My next monster will prob be a smaller one.
I will test it as soon as my dealer gets it. probably this week.
What makes you want a smaller bike?