News:

Welcome to the DMF

 

Clutch Cover????

Started by udiaz27, April 24, 2012, 02:04:15 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

udiaz27

April 24, 2012, 02:04:15 PM
What kind of clutch cover can i get for my ducati monster, it is a 2012 monster 1100evo, and i can't seem to find anyones that are compatible with my model. how do clutch covers work, do i just remove the original cover and put the new one, or do i need some other parts? thanks.

lazylightnin717

#1
April 24, 2012, 03:33:06 PM
I think the new 1100 EVO motor uses a wet clutch

Not sure what is available for the wet clutch Ducatis

Maybe I'm being captain obvious or maybe I'm at least being a little bit helpful?
Comes a time
When the blind man takes your hand
Says don't you see
Gotta' make it somehow
On the dreams you still believe

kopfjäger

#2
April 24, 2012, 07:29:29 PM
As stated above, your bike has a wet clutch so you don't have many if any options. I'm sure speedymoto will come out with something, but nothing along the lines of the dry clutch motors.
“Woohoohoohoo! Two personal records! For breath holding and number of sharks shot in the frickin\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\

udiaz27

#3
April 25, 2012, 08:23:01 AM
Thanks you guys, I guess I'll stop searching.

Slide Panda

#4
April 25, 2012, 08:26:10 AM
There's a couple covers that you bolt over the engine accessory case for the wet clutch bikes. But the selection is limited in comparison to the offerings for the Dry clutch bikes.

And there's no open options of course.
-Throttle's on the right, so are the brakes.  Good luck.
- '00 M900S with all the farkles
- '08 KTM 690 StupidMoto
- '07 Triumph 675 Track bike.

lazylightnin717

#5
April 25, 2012, 05:12:33 PM
Don't stop searching

If anything, voice your opinion to companies to make clutch covers for the new gen. Monsters

I'm sure you aren't the only one looking
Comes a time
When the blind man takes your hand
Says don't you see
Gotta' make it somehow
On the dreams you still believe

kopfjäger

#6
April 25, 2012, 05:25:49 PM
Speedymoto did these for the other wet clutch bikes, so I'm sure they'll be doing one for the 1100.



http://www.speedymoto.com/Merchant2/merchant.mvc?Screen=CTGY&Category_Code=WET
“Woohoohoohoo! Two personal records! For breath holding and number of sharks shot in the frickin\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\

monster 795

#7
July 21, 2014, 12:46:28 PM
R & G Racing makes covers that I haven't seen much of around.

http://www.rg-racing.com/

duccarlos

#9
July 21, 2014, 02:46:26 PM
I was going to suggest the transparent wet clutch covers.
Quote from: polivo on November 16, 2011, 12:18:55 PM
my keyboard just served me with paternity suit.

cayman s

#10
July 21, 2014, 08:17:18 PM
Quote from: monster 795 on July 21, 2014, 12:46:28 PM
R & G Racing makes covers that I haven't seen much of around.

http://www.rg-racing.com/

The R&G cover is designed to fit on top of/over the factory clutch cover.  Think of it as a clutch slider.
Print
Go Up Pages1
User actions