Price drop and new clutch parts available on my ad p88.

Sold, thanks.

Quote from: kyle on October 09, 2012, 04:23:36 PM
Just had a positive call from someone keen to look at the bike in the next day or two!

Pity I havent fitted the replacement sprocket carrier that I damaged yet.. I do have it though! haha

Hey Kyle, did u end up selling your 620??

Quote from: duke8 on October 14, 2012, 11:00:13 PM
Hey Kyle, did u end up selling your 620??

No, wasn't too keen.. made a few excuses really...lol Didn't seem like the right buyer
11 hours to go: http://www.ebay.com.au/itm/221138518971?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1586.l2649#ht_562wt_1397

Hi Everyone.
So the missus and I are having another Niblet! hence the sale of my 250.

2005 Honda VTR 250.
black body, grey frame, black rims.
60,400km.
brand new battery.
new chain.
near new front and rear sprockets.
oil/filter changed every 5000km.
air filter/plugs checked/cleaned/replaced every 10,000.
coolant, brake fluid and valve clearances last done at 50,000.
all minor servicing done by myself, all internals (valve clearances etc) done at Jeffery Honda.
brake pads have plenty of meat on them.
front tyre has plenty, rear is near indicators but there's still room after that.
tyres are Dunlop GPR Alpha 10's. the stickiest tyre i could find that fit! trust me you'll like them :wink:

mods include bar end mirrors to replace the fugly stock ones,
Ducati Monster bars, much wider lower bars for nimble handling, and less cramped monkeybike feeling.
aftermarket slip-on exhaust, sounds and looks much better than stock! weighs a ton less too haha.
will come with stock exhaust skip-on too, if i can find it in the shed.
previous owner had the ducktail airbrushed, matched my Jolly Roger Corsair helmet so I like it.

I bought it at 25,000km and have service history from previous owner.
Has been put down before,
only remaining damage is some grazing to the chrome on the instrument cluster, as seen in pic.

please note the bike will be sold unregistered, but it is ready to pass a roadworthy as is. this rego expired whilst I have been riding the Ducati.
I love my bikes and maintain them well, they may not be immaculate but thats because they get ridden not displayed. still cleans up pretty though!

bike is located in south east melbourne. contact for inspection. reply on here, PM, or text xxxxxxxxxx will be the quickest method.

Cheers!
Nibor

Http://imageshack.us/a/img534/7237/img2678ef.jpg
Http://imageshack.us/a/img3/604/img2676z.jpg
Http://imageshack.us/a/img339/778/img2677x.jpg
Http://imageshack.us/a/img534/6417/img2679b.jpg
Http://imageshack.us/a/img213/3456/img2680yq.jpg

And the asking price is??............................

Decided to shout my old Bag(750) a new set of fork springs (92,000 and sloppy as custard) and the left hand lower tube has a nice nick and is U/S!! 

Soooo does anybody have a suitable part or even an old Marzocchi pair of forks gathering dust somewhere that they dont want/need?? 

Or even something that would fit it the trees (50mm) and be suitable for the 750 wheel and brakes!

Suggestions?? 

Quote from: dragonworld on October 18, 2012, 04:18:16 PM
And the asking price is??............................

Haha oops. Copied text from another forum I posted on, price was in the title. Asking a measly $2900!

Where are you located Dragon? If I can find them you can have my stock 750 forks for $50. I fitted adjustable 900 forks, these came off at only 12,000km so they'd be a bit fresher than yours 

Hey mate!! I'm in Avondale Height (Sorta Essendon)

That'd be good if ya can find them!! Your in South Eastern suburbs? Yes??

If your garage is anything like mine it'll be an EPIC search!! 

Further price drop on clutch parts .
Vee Two basket SOLD.
See page 88.

Alright. Now you've done it.

Getting pressure to clean out the shed.

Now that the 1098 is gone I've got a couple of parts left.

Rear stand, Kaneg brand. Suit 1098, 848 etc. Good unit. Good nick. A couple of scratches etc. Paid about $200.00. Thinking $40.00 ono ie make an offer. Pick up from Nth Brisbane (Business Hours) or West Brisbane (After Hours). Apparently fits 2011+ Multistrada as well?

You can buy different drifts for it to siut all types of SSS monsters, 996, 998 etc. All look like they are about $35.00 each from the manufacturer.

http://www.kaneg.com.au/categories/Bike-Stands/Spares-and-Kits-for-Bike-Stands/







HID KIT IS GONE, GONE, GONE
HID light kit suit 1098 (H11) GONE. Removed from the bike working, presume it still does. Nice bright kit. White 8000w kit I think. Paid about $180.00 delivered. Sell $0.00. TOO LATE, HID KIT IS GONE

$0.00 you say?

Yes, frekin Free. NOT ANY MORE

Pick up as above. TOO LATE

Come on, do it. IT'S BEEN DONE




Stand still available.

Thanks.

Message sent re the 1098 stand

Cheap Haynes manuals for older monsters! (1991-96)
Not sure of shipping costs though.

http://store.proitalia.com/haynes-service-and-repair-manual-for-ducati-600-750-900-2v-p-99811.html

SOLD

Quote from: Two dogs on September 17, 2012, 08:04:50 PM
                           FOR SALE
Takano one piece BLACK racing leathers
Full armor in shoulder/ knee/ arms new knee slider pucks
Perforated chest /under arms /crutch/ fully lined . Shoulder vents to cool back.
To fit  size AUS 42 or height 5'7"- 5' 9" 34 waist 80-87 kg
$150