News:

This Forum is not for sale

 

Just rolled into the shop

Started by Slide Panda, October 02, 2012, 01:00:39 PM

Previous topic - Next topic

The Architect

Quote from: Slide Panda on October 02, 2012, 01:00:39 PM






I didn't know they made one side slotted rotors?  And they're extra vented!

ducpainter

Quote from: Mendo Dave on December 05, 2012, 11:06:12 AM
Real or fake ones?

How's he supposed to know which you want answered with that question?
"Once you accept that a child on the autistic spectrum experiences the world in
a completely different way than you, you will be open to understand how that
 perspective
    is even more amazing than yours."
    To realize the value of nine  months:
    Ask a mother who gave birth to a stillborn.
"Don't piss off old people The older we get, the less 'Life in Prison' is a deterrent.”



lethe

my favorite flat was when I found a nail went in head first.
pregnant dog to pull out but the plug held fine.
'05 Monster 620
'86 FZ600
'05 KTM SMC 625

Slide Panda

Here's a moto gem



Not much info, but the title says it was an SV1K that was down shifted when already at the redline. That's not gonna buff out
-Throttle's on the right, so are the brakes.  Good luck.
- '00 M900S with all the farkles
- '08 KTM 690 StupidMoto
- '07 Triumph 675 Track bike.

Speedbag

Whoa.  [clap]

Most mangled piston I've ever seen....
I tend to regard most of humanity as little more than walking talking dilated sphincters. - Rat

MendoDave

Quote from: Slide Panda on December 11, 2012, 09:13:11 AM
Here's a moto gem



Not much info, but the title says it was an SV1K that was down shifted when already at the redline. That's not gonna buff out

That's messed up.

Slide Panda

-Throttle's on the right, so are the brakes.  Good luck.
- '00 M900S with all the farkles
- '08 KTM 690 StupidMoto
- '07 Triumph 675 Track bike.

freeclimbmtb

2011 Monster 796 ABS

CW/evotech tail tidy, lightwereks integrated tail light, CRG Arrow bar end mirrors, Duc.ee solenoid eliminator & 696 midpipe, sans charcoal canister, pileon grab bars, Arrow Dark slipons (sans dB killers), Rizoma Zero11's, Rizoma Lux grips, Rizoma rearsets, Rizoma gas cap, 1098R Ohlins forks, IMA Triples, Galfer wave rotors, Brembo radial masters, Rizoma reservoirs, Ohlins DU737, Rizoma bars, 15t AFAM front and 41t supersprox rear sprocket with EK MVXC chain.

freeclimbmtb

Forgot I had a picture of this one...




My back tire by the time I found a Cyclegear in SLO when I was riding back from San Francisco to San Diego last fall.
2011 Monster 796 ABS

CW/evotech tail tidy, lightwereks integrated tail light, CRG Arrow bar end mirrors, Duc.ee solenoid eliminator & 696 midpipe, sans charcoal canister, pileon grab bars, Arrow Dark slipons (sans dB killers), Rizoma Zero11's, Rizoma Lux grips, Rizoma rearsets, Rizoma gas cap, 1098R Ohlins forks, IMA Triples, Galfer wave rotors, Brembo radial masters, Rizoma reservoirs, Ohlins DU737, Rizoma bars, 15t AFAM front and 41t supersprox rear sprocket with EK MVXC chain.

Slide Panda

Never saw that movie... but yeah, like they were separated at birth.

Walking the dog yesterday there was an Explorer parked in my hood with tires run bald on the street side tires. I don't know HOW people let their vehicles get this way.
-Throttle's on the right, so are the brakes.  Good luck.
- '00 M900S with all the farkles
- '08 KTM 690 StupidMoto
- '07 Triumph 675 Track bike.

Slide Panda

Quote from: freeclimbmtb on December 13, 2012, 06:35:26 AM
My back tire by the time I found a Cyclegear in SLO when I was riding back from San Francisco to San Diego last fall.

Having run a tire to the chord as well - it is shocking how quick the tires go once you get low. Wear bars on the shoulders are well enough, but a center wear pit like on slicks would be nice.
-Throttle's on the right, so are the brakes.  Good luck.
- '00 M900S with all the farkles
- '08 KTM 690 StupidMoto
- '07 Triumph 675 Track bike.

zooom

I can tell ya how....people are freaking delusional when they think of how much a tire ( much less a set) costs and then factor in mounting and balancing ( not even going into the potential of an alignment and issues there )...they are generally outright sticker shocked and decide to not spend it until they get a flat...we see it here all the damn time...because they upgraded to an SUV with big wheels/tires from their old Corolla and think that the tires should be the same money...add in the brainwashing of possible pricing from bad marketing of reality from places like Pep Boys with loss leaders that don't apply half the time....
99 Cagiva Gran Canyon-"FOR SALE", PM for details.
98 Monster 900(trackpregnant dog-soon to be made my Fiancee's upgrade streetbike)
2010 KTM 990 SM-T

Slide Panda

Oh you've seen my tires... no delusions about the cost of those suckers.   :-[

But yeah it amazes me where people cheap out. A neighbor with a freaking jag and Range Roomy in the drive took weeks after I pointed it out to replace a tire on the Roomy that had bubbled on the side. I was just waiting for it to not reappear for a few days, and then do so with a brand new tire and rim after a blow out.
-Throttle's on the right, so are the brakes.  Good luck.
- '00 M900S with all the farkles
- '08 KTM 690 StupidMoto
- '07 Triumph 675 Track bike.

yamifixer

I have part of a piston out of a Yamaha RD at home. I'll post a picture later. makes that look usable.

Quote from: Speedbag on December 11, 2012, 09:51:28 AM
Whoa.  [clap]

Most mangled piston I've ever seen....
'00 M900Sie, '66 Benelli Fireball, '70 Honda Z50
Valve Springs are EVIL

Slide Panda

-Throttle's on the right, so are the brakes.  Good luck.
- '00 M900S with all the farkles
- '08 KTM 690 StupidMoto
- '07 Triumph 675 Track bike.