has anyone used anything non-traditional for their turn signals?  I want to change mine, but I'm looking for some inspiration.

any suggestions?

I like to use these.

Fork wraparounds.
http://www.radiantz.com/index1.html?c15.html&1

Front or rear?  I use these stuck in the frame at the rear (you chuck the lame bezel and replace with an O-ring chosen from the assorted O-ring box available at the auto parts store, drill a small hole in the frame to run the wires, feed the wires through the hole and snug the O-ring so it keeps the light in place).  If the O-ring is too small the light won't stay, if it is too big the light won't fit.  

http://www.amazon.com/Combination-Clearance-Marker-Light-Amber/dp/B002NS8Z2C/ref=pd_sbs_auto_2

+1 on Oberon LED bar ends.  They looks tits and the fact they locate the indicators at the widest point of the bike and are visible from front and rear is great for visibility.

http://www.youtube.com/watch?v=whVJfLcvpVM

those are all good suggestions, thanks.


what about something that's not supposed to be an indicator?

maybe something like this shotglass?

http://afterhourschoppers.com/Genuine-After-Hours-Parts/Taillights/Aluminum-Shot-Glass-Taillight.html

Quote from: Privateer on February 16, 2013, 11:50:42 AM
those are all good suggestions, thanks.

geesh.........i had to do a triple take at your avatar! 
you look exactly like me! (minus the soul patch)

Quote from: Privateer on February 16, 2013, 11:50:42 AM
those are all good suggestions, thanks.


what about something that's not supposed to be an indicator?

maybe something like this shotglass?

http://afterhourschoppers.com/Genuine-After-Hours-Parts/Taillights/Aluminum-Shot-Glass-Taillight.html

I like it better in brass...

Quote from: memper on February 15, 2013, 04:52:20 PM
Fork wraparounds.
http://www.radiantz.com/index1.html?c15.html&1

Not for $250....

Radiantze has some wicked cool bits, butt those prices!!!

I've been trying to find these K&S Technologies LED barend turn signals in Europe.
http://www.kandstech.com/index.php?page=LEDbarend
Unfortunately I haven't found a retailer that can supply them. 

True, Radientz are pricey for most of their items but that link was just an example. Most of that stuff can be found cheaper elsewhere.
For example
http://www.customdynamics.com/truflex_truwraps.htm

hmm.. well I found something that has inspired me, but not sure where to get the material.  Tried to find a local supplier but they want me to buy 60 feet of acrylic...

Acrylic rods and tubes, 1 ft lengths available:

http://www.mcmaster.com/#acrylic/=lpk04x

Starting about half way down the page.

Quote from: Speeddog on March 02, 2013, 04:45:37 PM
Acrylic rods and tubes, 1 ft lengths available:

http://www.mcmaster.com/#acrylic/=lpk04x

Starting about half way down the page.

i looked there before posting and I only found clear, is amber/yellow in there somewhere and I missed it?