Dear Sir,

this is about 2V Non Linear TPS Baseline Adjustment
my tps is linear-type non-adjustable throttle position sensor. According to  http://www.bikeboy.org/ducati2vthrottleb.html  I have the  TPS in first picture. So  what is the best method?

1. JPDIAG
2. Or multimeter method if possible.

Best regards

Thilina

Reset your TPS with 1. JPDIAG

Post in tech if you have more questions, this is a how two thread for DucatiDiag/MMDiag not a thread for resetting TPS

Dear Sir,

I have a Little thing to ask , In Jp diag there is a tab called " DTC"  and also " ECU unlock"

1. What are those ?
2. ECU Unlock opens a window  and it has , ecu virginity check & Unlock ECU, so what are those and are that need to do general things like Co trim, tests, tps rest. that was not in article. please advise

Best Regards

Thilina Karunachandra

can anyone send pinout for 3 PIN connector to OBD2 ?? on the first  side theres pinout for "crocodiles"... so if I can have pinout for the 3PIN connector too i can make my own.. thanks a lot..

Just Google OBD2 to Fiat wire diagram or something similar

can anyone check this if it is right.. the additional black then goes from - Battery to pin 4.. If somebody would be so nice to checked it.. then I can try it tommorow

Impossible to see on the cable without using a voltmeter. + and -  should be 12v and you can test the cable in Ducatidiag without hooking it up to your bike (just the power and ground to the battery. That should determine if you got the K-line right.

It is not difficult to check it with multimeter... my friend checked his FIAT reduction and it is just right this, but without crocodile for - pole

For those who have flashed before, what file format are the mappings?

Looks like we*may*  have another option for a writer: http://www.morini-riders-club.com/forum/viewtopic.php?f=2&t=2893

  .ddg

Quote from: JohnEE on October 27, 2013, 04:36:36 PM
  .ddg

So looks like .ddg files are encrypted. And can only be converted by JP and MaGax. If anyone with a s2r 800 map in ddg for open air box and slip on exhaust could get JP to convert it to a bin file for me I would really really appreciate it. Hell, I'll even paypal pay for it if you want.

I wish i had the foresight to download the maps library when DucatiDiag went down, my S2R1k is hurting for the race map....

Good news, everyone! Today i manage flash my S4RS with IAW5x ECU by GUZZI writer (reader works also well). There is even way to convert *.ddg files to bin (by program ECM) . I was also happy to try what happen when you flashing and your ntb. crash and no worries you just flash it again and it works fine.

Do you know of a repository for ECU Maps for Ducs?

JohnEE: PM