Quote from: Bonwilder on July 17, 2008, 07:55:44 PM
Girls are Hot!
That bike is my bi*ch.
Does working out with 200lbs on squat and 225lbs on dead lifts mean I have too much testosterone?

Strangely aroused!

Quote from: Bonwilder on July 17, 2008, 07:55:44 PM

Does working out with 200lbs on squat and 225lbs on dead lifts mean I have too much testosterone?

Did I say hand tools?  I meant power tools. 

Quote from: pipeliner1978 on July 17, 2008, 08:18:06 PM
Strangely aroused!

nothing strange about that.  and honestly it sounds like it'll just end up being a bunch of guys standing around having a beer while the bonwilder does all the wrenching.  which, don't get me wrong....is fine by me.   

fine by me

Oh yeah, Tommy, let me know when you plan to do this. I'm willing to give a hand, or simply watch and drink beer---whatever. 

Quote from: McKraut on July 18, 2008, 05:44:59 AM
nothing strange about that.  and honestly it sounds like it'll just end up being a bunch of guys standing around having a beer while the bonwilder does all the wrenching.  which, don't get me wrong....is fine by me.   

+1

Quote from: Ronr on July 17, 2008, 09:01:16 PM
Did I say hand tools?  I meant power tools. 

Don't use power tools...do like hand tools  [thumbsup]

Quote from: Bonwilder on July 18, 2008, 10:43:42 PM
Don't use power tools...do like hand tools  [thumbsup]

Bonnie, the clip ons can be a bit of a pain in the ass to get on.  Mostly due to readjusting all the controls and making sure you have clearance for al the hydraulic lines.  But it does involve removing the headlight bucket for a while and messing with the rubber damping bolts for the gauges.  I've done 2 sets of clip ons for monsters, it's not that bad, but it is time consuming.  And you will probably want to use at least 1 power tool (drill) for the controls.

Quote from: bryant8 on July 19, 2008, 12:28:48 AM
Bonnie, the clip ons can be a bit of a pain in the ass to get on.  Mostly due to readjusting all the controls and making sure you have clearance for al the hydraulic lines.  But it does involve removing the headlight bucket for a while and messing with the rubber damping bolts for the gauges.  I've done 2 sets of clip ons for monsters, it's not that bad, but it is time consuming.  And you will probably want to use at least 1 power tool (drill) for the controls.

I'll keep that in mind, thanks

If you get the Rizomas you may have to flip your banjo bolts on the master cylinder 180 degrees to account for the riser on the clip ons.  If you don't, the lines may kink up on the riser.

  Huh?  You lost me two posts ago.  Guess I am all out of testosterone.  How about you guys work on the bike.  I will watch and get you a cold beer when you need one!   

you had me at beer.

I may be in for this ..I'll have to check the schedule.

Quote from: McKraut on July 19, 2008, 07:56:24 AM
you had me at beer.

OK, that may be the best/funniest post ever! Coffee all over the desk is living proof! Great way to wake up!!

Quote from: The Evil Count Dookie-Duke on July 21, 2008, 04:00:21 AM
I may be in for this ..I'll have to check the schedule.

Is this still on for this Saturday? If so, I can swing by Castropia to help drain beer bottles.